Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Tequesta, FL
Window installation in Tequesta typically runs $650-$1,400 per opening for standard vinyl or aluminum impact-rated units, with most retrofits on the village’s 1955-1985 ranch stock requiring marine-grade hardware and full Palm Beach County permitting. Because nearly every home sits within salt-air range of the Loxahatchee River or Intracoastal Waterway, we specify anodized or clad frames and Florida Product Approved products on every measured survey. Call (561) 475-1246 to schedule your free estimate, and we’ll hand you the written price before any work starts.
We are Sightline Windows & Doors, independently owned and operated under the Haven Standard since 2012. Our crews serve Tequesta from our South Florida dispatch office, and every job leaves a documented photo record.
Why Tequesta Homes Are Different
Tequesta’s housing stock is concentrated in a narrow construction window, mostly post-war ranch and Florida vernacular homes built between the late 1950s and early 1980s. Many of these sit directly on the Loxahatchee River or canal systems, which means salt-air corrosion attacks standard aluminum extrusions and multipoint locking hardware faster than anywhere inland in Palm Beach County. The original jalousie windows and single-pane aluminum sliders common in the village core are outright ineligible for impact-opening protection credit under current Florida Building Code, so replacement triggers full permitting with product-approval documentation and energy compliance calculations.
The village’s position at the coastal strip where the Loxahatchee meets the Intracoastal also means every installation must satisfy windborne debris region requirements. Marine-grade or anodized frames are not an upsell here; they are a practical necessity. We routinely find original hollow-core entry doors and uninsulated sliding glass units that predate post-Hurricane Andrew code, even in the larger estate homes built along the river in the 1990s and 2000s.
Our Main Tequesta Services
Tequesta homeowners call us most often for full window replacement and impact-rated protection. Here is what each service involves in this market.
Window Replacement in Tequesta
Most Tequesta window replacement jobs address original jalousie or single-pane aluminum units in ranch homes near the river or Intracoastal. We measure every opening to the nearest 1/8 inch, specify Florida Product Approved impact-rated replacements, and pull the Palm Beach County permit with energy compliance documentation included. The written quote matches the measured survey exactly. Window Replacement in Tequesta covers our full process for retrofit and new-construction installs.
Impact Windows & Doors in Tequesta
Every address in Tequesta falls within Florida’s windborne debris region, which means impact-rated windows and doors are code-required for replacement, not optional. We specify products with valid Miami-Dade NOA or Florida Product Approval for the local design wind speed, and we document the approval number on the written scope. Marine-grade hardware is standard on every Tequesta install due to salt-air exposure. Impact Windows & Doors in Tequesta details our product lines and approval documentation.
Sliding & Patio Doors in Tequesta
Tequesta’s original sliding glass doors are typically single-pane aluminum units with corroded rollers and failed weatherstripping, common in 1970s ranch homes along the waterways. We replace these with impact-rated, thermally broken multi-slide or standard lift-and-slide systems, specifying marine-grade tracks and stainless hardware. The measured survey records sill condition and header load before we quote. Sliding & Patio Doors in Tequesta explains our sizing and hardware options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Tequesta
Window installation in Tequesta means working with a housing stock built almost entirely between 1955 and 1985, where original jalousie windows and single-pane aluminum sliders are still common and are ineligible for impact-opening protection credit under Florida Building Code. Salt-air saturation from the Loxahatchee River and Intracoastal Waterway corrodes standard hardware within years, so we specify anodized or clad frames and marine-grade multipoint locks on every measured survey. Window Installation is our core service, governed by Haven Clause 1: the measurement and the written price are the same document.
Single & Double Hung Windows
Signs you need it
Original aluminum single or double hung units with failed balances, fogged glass, or frames that no longer lock securely are standard in Tequesta’s 1960s and 1970s ranch stock.
What it costs in Tequesta
Single and double hung window installation in Tequesta typically ranges from $650 to $1,200 per opening for vinyl or aluminum impact-rated units, with clad-wood systems running higher.
How we do it
We measure the existing rough opening and record frame squareness, then specify the replacement unit with Florida Product Approval number, install with impact-rated fasteners and approved sealant, and photograph the completed sash operation and lock engagement for the job record.
Horizontal Roller Windows
Signs you need it
Roller windows with corroded tracks, cracked wheels, or frames that jump the sill during operation are common in waterfront Tequesta homes where salt air has degraded original hardware.
What it costs in Tequesta
Horizontal roller window installation in Tequesta typically ranges from $700 to $1,300 per opening for impact-rated aluminum or vinyl units with marine-grade hardware.
How we do it
We inspect the sill track for corrosion depth, specify a replacement with stainless or marine-grade roller assembly, install with shims and approved fasteners, and test full travel before documenting operation in the photo record.
What Window Installation Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Single or double hung window | $650 - $1,200 |
| Horizontal roller window | $700 - $1,300 |
| 3-panel sliding (3-lite roller) window | $1,200 - $2,400 |
Do you pull permits for window replacement in Tequesta?
Yes. Palm Beach County requires a building permit for all window replacements, and we pull it as part of our standard scope. The permit fee and inspection scheduling are included in your written quote. Call (561) 475-1246 for an exact quote - estimates are free.
How long does window installation take in Tequesta?
Most Tequesta retrofits complete in one to two days for a full-home replacement, assuming the existing frames are structurally sound. Jalousie-to-impact conversions may add time for rough-opening modification. Call (561) 475-1246 for an exact quote - estimates are free.
Door Installation in Tequesta
Door installation in Tequesta addresses a housing stock where original hollow-core entry doors and single-pane sliding glass units predate post-Hurricane Andrew code requirements, and salt-air exposure has degraded hardware and seals even in newer riverfront estates. We specify impact-rated replacements with valid Florida Product Approval or Miami-Dade NOA, and we document the approval number, hardware grade, and installation method on the written scope before any work begins. Door Installation covers our full measured survey process for entry, patio, and specialty door systems.
Entry Doors
Signs you need it
Original hollow-core or uninsulated steel entry doors with corroded hinges, failed weatherstripping, or single-pane decorative glass are common in Tequesta’s 1960s-1980s ranch homes.
What it costs in Tequesta
Entry door installation in Tequesta typically ranges from $1,800 to $4,500 for impact-rated fiberglass or steel systems with multipoint locking and decorative glass options.
How we do it
We measure the rough opening and record jamb condition and header load, then specify the door unit with Florida Product Approval number, install with impact-rated fasteners and approved sealant, and photograph the lock engagement and sweep contact for the job record.
Hurricane-Proof Front & Entry Doors
Signs you need it
Existing entry doors without impact-rated glass or with failed pressure ratings cannot satisfy Palm Beach County replacement requirements in Tequesta’s windborne debris region.
What it costs in Tequesta
Hurricane-proof entry door installation in Tequesta typically ranges from $2,200 to $5,500 for high-design-pressure systems with laminated glass and marine-grade hardware.
How we do it
We verify the design wind speed for the specific Tequesta address, specify a door with matching Miami-Dade NOA or Florida Product Approval, install with reinforced jamb and three-point lock, and document the pressure rating and hardware grade in the photo record.
What Door Installation Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Standard entry door replacement | $1,800 - $4,500 |
| Hurricane-proof front door | $2,200 - $5,500 |
| French or double door system | $3,500 - $7,500 |
Do you replace sliding glass doors in Tequesta?
Yes. We replace original single-pane aluminum sliders with impact-rated, thermally broken systems, specifying marine-grade tracks and stainless hardware for salt-air resistance. Call (561) 475-1246 for an exact quote - estimates are free.
What door hardware holds up to Tequesta’s salt air?
We specify stainless steel or marine-grade multipoint locking hardware on every Tequesta door install, and we document the hardware grade on the written scope. Standard zinc-alloy hardware corrodes within two to three years here. Call (561) 475-1246 for an exact quote - estimates are free.
Energy-Efficient Windows in Tequesta
Energy-efficient windows in Tequesta solve a specific problem: the village’s original 1955-1985 housing stock was built with single-pane aluminum units that conduct heat and provide no insulation, while the subtropical climate delivers year-round cooling loads and intense UV exposure. We specify low-E coatings, argon gas fill, and insulated laminated glass with SHGC and U-factor ratings that satisfy current Palm Beach County energy compliance requirements, and we document the performance values on the measured survey you keep. Energy-Efficient Windows details our product tiers and performance specifications.
Low-E & Argon Gas Glass
Signs you need it
Rooms with direct western or southern exposure that overheat by midday, or windows with visible UV damage to interior finishes, indicate failed or missing low-E coating.
What it costs in Tequesta
Low-E and argon gas glass upgrades in Tequesta typically add $80 to $150 per opening to the base window cost, with full replacement units ranging from $750 to $1,400.
How we do it
We calculate the solar heat gain coefficient and U-factor required for the specific orientation, specify the coated glass package with manufacturer certification, and record the performance values on the written scope and photo record.
Insulated Laminated Glass
Signs you need it
Original single-pane windows with condensation between failed attempts at aftermarket tint, or rooms with noticeable temperature stratification near glass surfaces.
What it costs in Tequesta
Insulated laminated glass windows in Tequesta typically range from $900 to $1,800 per opening for impact-rated units with low-E and argon, satisfying both energy and windborne debris requirements.
How we do it
We measure the existing opening and specify a dual-pane laminated unit with warm-edge spacer, install with approved sealant and backer rod, and photograph the edge seal and sightline alignment for the job record.
What Energy-Efficient Windows Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Low-E/argon upgrade (add to base window) | $80 - $150 per opening |
| Insulated laminated glass window | $900 - $1,800 |
| Full ENERGY STAR replacement window | $850 - $1,600 |
Will energy-efficient windows lower my cooling bills in Tequesta?
Yes. Properly specified low-E and argon-filled units reduce solar heat gain, which is the dominant cooling load in Tequesta’s subtropical climate. We document the projected SHGC improvement on your written scope. Call (561) 475-1246 for an exact quote - estimates are free.
Do energy-efficient windows also satisfy impact requirements?
Yes. We specify insulated laminated glass units that carry both Florida Product Approval for windborne debris and ENERGY STAR performance ratings, documented on the same scope. Call (561) 475-1246 for an exact quote - estimates are free.
Impact Garage Doors in Tequesta
Impact garage doors in Tequesta protect a vulnerable opening that original 1960s-1980s construction often left with uninsulated, non-impact-rated panels that fail under wind pressure and cannot stop windborne debris. Because the village’s entire footprint sits within the windborne debris region, garage door replacement triggers the same Florida Product Approval or Miami-Dade NOA requirement as windows and entry doors, and salt-air exposure demands marine-grade track and hardware. Impact Garage Doors covers our wind-load engineering and installation documentation.
Hurricane-Rated Garage Doors
Signs you need it
Original thin-gauge steel or uninsulated aluminum garage doors with rusted bottom sections, failed springs, or no wind-load rating label visible on the interior panel.
What it costs in Tequesta
Hurricane-rated garage door installation in Tequesta typically ranges from $2,800 to $6,500 for wind-load-rated steel or aluminum systems with impact-resistant glazing options.
How we do it
We measure the opening and record header and jamb condition, specify a door with Miami-Dade NOA or Florida Product Approval for the local design wind speed, install with reinforced track and approved fasteners, and document the wind-load label and spring balance in the photo record.
Wind-Load Code Compliance
Signs you need it
Any garage door replacement in Tequesta requires wind-load-rated product approval, and original doors installed before 1992 almost certainly lack the necessary documentation.
What it costs in Tequesta
Wind-load code compliance upgrades in Tequesta typically range from $3,200 to $7,000 for high-cycle spring systems and reinforced track assemblies on larger two-car openings.
How we do it
We verify the design wind speed at the specific Tequesta address, engineer the track and spring system to match, pull the Palm Beach County permit, and pass inspection with the product approval documentation filed.
What Impact Garage Doors Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Hurricane-rated garage door (single car) | $2,800 - $5,000 |
| Hurricane-rated garage door (two car) | $3,500 - $6,500 |
| Wind-load code compliance upgrade | $3,200 - $7,000 |
Do I need a permit to replace my garage door in Tequesta?
Yes. Palm Beach County requires a building permit for all garage door replacements to verify wind-load rating and installation method. We pull the permit and schedule inspection as standard scope. Call (561) 475-1246 for an exact quote - estimates are free.
Can I keep my existing garage door opener with a new impact door?
Sometimes. We evaluate the opener’s horsepower, rail condition, and safety sensor function during the measured survey; if it meets the new door’s weight and cycle requirements, we document its continued use on the written scope. Call (561) 475-1246 for an exact quote - estimates are free.
Custom & Geometric Windows in Tequesta
Custom and geometric windows in Tequesta address the architectural character of a village where 1990s-2000s estate homes along the Loxahatchee River often feature arched openings, oversized glass walls, and non-rectangular shapes that standard stock units cannot fill. Even the original 1960s ranch stock occasionally includes geometric accent windows or custom configurations that require templated fabrication rather than field modification. Custom & Geometric Windows details our measurement and fabrication coordination process.
Geometric & Shaped Windows
Signs you need it
Existing arched, circular, or trapezoidal windows with failed seals, fogged glass, or frames that no longer match the surrounding wall plane after settling.
What it costs in Tequesta
Geometric and shaped window installation in Tequesta typically ranges from $1,500 to $4,000 per opening, depending on complexity, radius, and whether impact-rated laminated glass is required.
How we do it
We template the exact radius or angle on site with digital measurement, transmit the template to the manufacturer for fabrication approval, and coordinate delivery and installation with the documented template match verified in the photo record.
Oversized Openings
Signs you need it
Large fixed or operating windows exceeding standard manufacturer size limits, common in riverfront estate homes with designed views, where multiple smaller units would interrupt the sightline.
What it costs in Tequesta
Oversized custom window installation in Tequesta typically ranges from $3,000 to $8,500 per opening for impact-rated, thermally broken systems with engineered support headers.
How we do it
We engineer the header and sill support for the concentrated load, specify the unit with reinforced frame and Florida Product Approval for the span, install with crane or specialized lifting equipment if required, and document the structural connection and sightline alignment.
What Custom & Geometric Windows Costs in Tequesta
| Item | Typical range in Tequesta |
|---|---|
| Geometric or shaped window | $1,500 - $4,000 |
| Arched or curved window | $2,000 - $5,500 |
| Oversized custom opening | $3,000 - $8,500 |
How long does custom window fabrication take for Tequesta?
Most geometric and custom units require eight to twelve weeks from templated measurement to delivery, depending on complexity and manufacturer backlog. We document the production schedule on your written scope. Call (561) 475-1246 for an exact quote - estimates are free.
Can custom windows still be impact-rated?
Yes. We work with manufacturers including Therma-Tru and ES Windows to fabricate custom shapes with laminated impact-rated glass and reinforced frames, and we document the Florida Product Approval or Miami-Dade NOA on the written scope. Call (561) 475-1246 for an exact quote - estimates are free.
Brands We Service in Tequesta
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by performance tier and price range for what the opening requires, not by margin. Common hardware and sash components for Tequesta’s most frequent retrofits are stocked regionally, with most non-stock parts arriving within five to seven business days. See our brands for full specifications and approval documentation.
Pricing for Windows & Doors in Tequesta, FL
| Service | Typical range in Tequesta |
|---|---|
| Single/double hung window | $650 - $1,200 |
| Horizontal roller window | $700 - $1,300 |
| 3-panel sliding window | $1,200 - $2,400 |
| Entry door replacement | $1,800 - $4,500 |
| Hurricane-proof front door | $2,200 - $5,500 |
| French/double door system | $3,500 - $7,500 |
| Low-E/argon upgrade | $80 - $150 per opening |
| Insulated laminated glass window | $900 - $1,800 |
| ENERGY STAR replacement window | $850 - $1,600 |
| Hurricane-rated garage door (single) | $2,800 - $5,000 |
| Hurricane-rated garage door (two car) | $3,500 - $6,500 |
| Geometric/shaped window | $1,500 - $4,000 |
Prices in Tequesta push higher when existing frames require marine-grade replacement, when rough openings need structural modification for code compliance, or when custom fabrication is required. The written quote you receive before any work starts is the final invoice - Haven Clause 1, no surprises.
Neighborhoods We Serve in Tequesta
We work across Tequesta’s full village limits, from the original ranch-home core near the Tequesta Drive corridor to the estate properties along the Loxahatchee River. Crews dispatch from our South Florida office, and most Tequesta addresses schedule within standard lead times.
- Loxahatchee Riverfront estates
- Tequesta Country Club area
- Village core (Tequesta Drive corridor)
- Canal-front sections near the Intracoastal
- River Ridge and adjacent riverfront communities
Service Area - Cities Near Tequesta
Our crews serve Tequesta and the surrounding northern Palm Beach County communities from our South Florida dispatch office. We also work in North Palm Beach, FL, Lake Park, FL, West Palm Beach, FL, and Palm Beach Gardens, FL. Every job in every city operates under the same Haven Standard: written price first, verified crew, documented evidence, no surprises.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Tequesta
We answer calls live 24/7, and we typically schedule measured surveys in Tequesta within one to three business days. Installation lead times vary by product type, with custom fabrication requiring the longest scheduling window. Call (561) 475-1246 to check current availability.
Some Tequesta communities, particularly riverfront estates and golf-course sections, have architectural review committees that require product samples and color approval before permitting. We provide the product data sheets and finish samples needed for HOA submission as part of our standard documentation.
Palm Beach County requires a building permit for all window and door replacements in Tequesta, with product-approval documentation and energy compliance calculations submitted. We pull the permit, schedule inspections, and file the final approval as standard scope on every job.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tequesta Customers Say
"Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.