Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Lake Park, FL
Window installation in Lake Park typically runs $650-$1,400 per opening for impact-rated units, with most full-home projects priced between $8,500 and $22,000 depending on rough-opening conditions and frame type. Because Lake Park’s housing stock sits directly on the Lake Worth Lagoon, every replacement must account for salt-air corrosion that destroys standard aluminum frames in five to eight years and Florida Building Code wind-borne debris requirements that make non-impact products unpermitable. We start every Window Installation engagement with a measured survey you keep, and the written quote cannot differ from that document. Call (561) 475-1246 to schedule yours.
Why Lake Park Homes Are Different
Lake Park sits on the original Kelsey City plat from the 1920s through 1950s, meaning its core neighborhoods are dense with compact concrete block stucco homes built during the postwar boom. Many still carry louvered jalousie windows or early aluminum sliders in non-standard rough-opening sizes that newer tract developments never used. The salt air here, bracketed by the Lake Worth Lagoon to the east and less than two miles from the Atlantic, pits and seizes aluminum frames faster than inland Palm Beach County communities like Greenacres.
Florida insurers have been aggressively non-renewing policies on homes with jalousie windows, since those louvered panels carry no impact rating and void wind-mitigation credits entirely. We hear it constantly from Lake Park homeowners who received a non-renewal notice and need every opening replaced before their policy lapses. That urgency is real, but the work still requires measured surveys, permit pulls, and inspections. The town’s older frame dimensions often demand custom-sized or field-modified impact units, driving labor time above what newer construction requires.
Our Main Lake Park Services
These are the two services Lake Park homeowners call about most, plus the door systems we measure on the same visit.
Window Replacement in Lake Park
Most Window Replacement in Lake Park involves pulling out jalousie or single-pane aluminum units and installing impact-rated replacements that satisfy both the Florida Building Code and insurance underwriters. We measure every rough opening, document frame conditions, and specify products from our eight manufacturer lines by what the opening requires, not by what is in stock.
Impact Windows & Doors in Lake Park
Impact Windows & Doors in Lake Park are not optional for coastal Palm Beach County; they are the minimum legal standard for permit approval. We specify laminated glass and reinforced frames from PGT, CGI, and CWS that meet the HVHZ requirements for your zone, with the written price established before any work starts.
Sliding & Patio Doors in Lake Park
Sliding & Patio Doors in Lake Park take the worst salt-air exposure of any opening in the home, with multi-point hardware corroding fastest where the breeze carries lagoon spray. We measure track depth, header load, and sill condition before specifying impact-rated rollers and frames that will survive the five-to-eight-year cycle that destroys standard units here.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Lake Park
Window installation in Lake Park means working with rough openings from the 1950s and 1960s that were never standardized, in homes where salt air has already compromised the aluminum frames that original builders installed. The combination of non-standard dimensions and active corrosion means we often find frame rot extending into the CBS surround, requiring field modification that newer inland developments simply do not need. We start every Window Installation with a measured survey you keep, and the written quote cannot differ from that document.
Single & Double Hung Windows
Signs you need it
Your sashes no longer stay open without a prop, or you feel air movement at the meeting rail even when both sashes are locked.
What it costs in Lake Park
Single and double hung impact window installation in Lake Park typically ranges from $650 to $1,200 per opening, with full-home projects running $8,500 to $18,000 depending on rough-opening condition and frame repair needs.
How we do it
We remove the existing unit, inspect the rough opening for salt corrosion or moisture intrusion into the CBS, install the new impact-rated frame with proper shimming and fastening per Palm Beach County code, then seal with backer rod and approved sealant before scheduling inspection.
Horizontal Roller Windows
Signs you need it
The sash jumps its track, the rollers grind instead of glide, or you can rock the panel in its frame.
What it costs in Lake Park
Horizontal roller impact windows in Lake Park generally run $700 to $1,350 per opening, with multi-unit projects benefiting from consolidated labor but individual openings in poor frame condition trending toward the higher end.
How we do it
We measure track width and sill level, remove the existing roller assembly and frame, repair or replace corroded sill pans common in lagoon-front homes, install the new impact-rated unit with stainless steel rollers, and verify operation before documenting with photo evidence.
What Window Installation Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Single / double hung impact window | $650 - $1,200 per opening |
| Horizontal roller impact window | $700 - $1,350 per opening |
| Full-home replacement (10-18 openings) | $8,500 - $22,000 |
How long does window installation take in Lake Park?
Most full-home window replacements in Lake Park require 2-4 working days for installation, plus permit lead time of 5-10 business days through Palm Beach County. Homes with jalousie conversions or non-standard rough openings add time for field modification. Call (561) 475-1246 for a timeline based on your specific openings.
Will my insurance non-renewal affect what windows I need?
Yes, insurance non-renewal notices in Lake Park typically require documented impact-rated openings with Florida Product Approval numbers, not just any replacement window. We specify products that carry the exact ratings your underwriter requires and include those numbers in your written quote. Call (561) 475-1246 to review your notice with us.
Door Installation in Lake Park
Door installation in Lake Park faces the same salt-air assault as windows, but with the added load of multi-point hardware that seizes when corrosion reaches the locking mechanism. Entry doors on lagoon-facing homes often show frame rot at the sill and jamb within six years of installation if standard aluminum was used. We start every Door Installation with a measured survey you keep, and the written quote cannot differ from that document.
Entry Doors
Signs you need it
Your door sticks seasonally, daylight shows at the jamb, or the sweep has compressed to the point it no longer contacts the threshold.
What it costs in Lake Park
Entry door installation in Lake Park typically ranges from $1,800 to $4,500 for impact-rated fiberglass or steel units, with sidelite additions and transoms running higher due to rough-opening modification.
How we do it
We measure jamb plumb and header level, remove the existing unit and inspect for moisture intrusion at the sill common in lagoon-front homes, install the new pre-hung impact-rated door with composite or aluminum-clad frame, shim and fasten per manufacturer specification, then verify latch and deadbolt engagement before photo documentation.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current door carries no Florida Product Approval number, or your insurance non-renewal notice specifically cites the entry door as non-compliant.
What it costs in Lake Park
Hurricane-proof entry door systems in Lake Park generally run $2,200 to $5,500 installed, with decorative glass inserts and multi-point hardware upgrades at the higher end of that range.
How we do it
We verify the design pressure rating required for your specific Palm Beach County zone, specify the appropriate impact-rated door and laminated glass package from our manufacturer lines, pull the permit, install with proper anchoring into the CBS structure, and pass inspection before final documentation.
What Door Installation Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Standard entry door replacement | $1,800 - $4,500 |
| Hurricane-proof entry door system | $2,200 - $5,500 |
| French / double door set (impact-rated) | $3,500 - $7,500 |
Do I need a permit to replace my front door in Lake Park?
Yes, Palm Beach County requires a permit for any exterior door replacement that changes the frame or involves an impact-rated product, which covers virtually every door installation in Lake Park’s coastal zone. We pull the permit, schedule inspection, and include those costs in your written quote. Call (561) 475-1246 to confirm your specific requirements.
How do I know if my current door is impact-rated?
Look for a Florida Product Approval number on a label inside the door edge or frame; if there is no label, or if the number does not appear in the Florida Building Code database, the door is not impact-rated. We verify this during our measured survey and document our findings in writing. Call (561) 475-1246 for a free assessment.
Energy-Efficient Windows in Lake Park
Energy-efficient windows in Lake Park must solve two problems at once: the solar heat gain that raises cooling loads year-round, and the air infiltration that occurs when salt-corroded frames lose their seal. Original jalousie windows are essentially unsealable, and early aluminum sliders conduct heat directly into the home. We start every Energy-Efficient Windows specification with a measured survey you keep, and the written quote cannot differ from that document.
Low-E & Argon Gas Glass
Signs you need it
Your floors and furnishings fade in bands where direct sun hits, or your AC runs continuously from 10 a.m. to 4 p.m. even with the thermostat at 78.
What it costs in Lake Park
Low-E with argon gas fill in Lake Park typically adds $80 to $150 per opening over standard impact glass, with payback periods of 4-7 years depending on current cooling costs and home orientation.
How we do it
We measure solar orientation and existing shading, specify the appropriate Low-E coating and argon fill package from ES Windows or ECO Window Systems, verify the U-factor and SHGC ratings meet your performance target, and install with warm-edge spacers to prevent seal failure in coastal humidity.
Insulated Laminated Glass
Signs you need it
You need both impact protection and thermal performance, but standard laminated glass runs too hot on south and west exposures.
What it costs in Lake Park
Insulated laminated impact glass in Lake Park generally runs $950 to $1,650 per opening, combining two performance layers in one unit that satisfies both code and energy goals.
How we do it
We specify a dual-pane unit with laminated exterior lite and Low-E coated interior lite, separated by argon fill and warm-edge spacer, installed in an impact-rated frame that meets Palm Beach County HVHZ requirements while delivering the lowest U-factor available in our product lines.
What Energy-Efficient Windows Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Low-E / argon upgrade (add to base impact unit) | +$80 - $150 per opening |
| Insulated laminated impact glass | $950 - $1,650 per opening |
| Full-home energy-efficient replacement | $11,000 - $26,000 |
Will energy-efficient windows lower my electric bill in Lake Park?
Yes, properly specified Low-E and argon-filled units typically reduce cooling loads 15-25% in Lake Park’s sun-exposed homes, with the greatest impact on south and west elevations where jalousie or single-pane units currently exist. We calculate estimated savings during our measured survey using your home’s orientation and current glass type. Call (561) 475-1246 for a performance estimate.
Do energy-efficient windows still meet impact requirements?
Yes, all energy-efficient windows we specify in Lake Park carry Florida Product Approval as impact-rated products; the energy performance is an additional layer, not a replacement for code compliance. We document both ratings in your written quote. Call (561) 475-1246 to review the specific numbers for your openings.
Impact Garage Doors in Lake Park
Impact garage doors in Lake Park are the most frequently overlooked opening in insurance non-renewal notices, with homeowners focused on windows while the garage door fails wind-mitigation inspection. The large surface area and high wind load make garage doors critical to structural integrity during a hurricane event, and standard non-rated doors are unpermitable in Palm Beach County’s coastal zone. We start every Impact Garage Doors assessment with a measured survey you keep, and the written quote cannot differ from that document.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind load sticker, flexes visibly in moderate winds, or your insurance inspection cited the garage door as non-compliant.
What it costs in Lake Park
Hurricane-rated garage door installation in Lake Park typically ranges from $2,800 to $6,500 for a standard two-car opening, with custom sizes and high-cycle spring upgrades at the upper end.
How we do it
We measure the opening and calculate the design wind load for your specific Palm Beach County exposure category, specify the appropriate impact-rated door and track system from Mr-Glass or Therma-Tru, install with reinforced struts and heavy-duty hardware, and verify operation and wind load certification before inspection.
Wind-Load Code Compliance
Signs you need it
Your permit application was rejected for insufficient garage door documentation, or your existing door was installed before 2002 when current Florida Building Code wind load requirements took effect.
What it costs in Lake Park
Wind-load code compliance upgrades in Lake Park generally run $1,200 to $3,500 when the existing door can be reinforced with struts and hardware, or $2,800 to $6,500 for full replacement when the door itself is non-compliant.
How we do it
We review your permit status or inspection report, measure the opening and calculate required wind load, specify either a reinforcement package or full replacement with documentation that satisfies Palm Beach County building officials, and manage the permit and inspection process through completion.
What Impact Garage Doors Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Hurricane-rated garage door (standard 2-car) | $2,800 - $6,500 |
| Wind-load reinforcement of existing door | $1,200 - $3,500 |
| High-cycle spring upgrade (add to replacement) | +$400 - $800 |
Does my garage door need to be impact-rated if my windows already are?
Yes, Palm Beach County requires all exterior openings including garage doors to meet wind-borne debris protection standards; partial compliance will not pass inspection or satisfy insurance underwriters. We assess the garage door during the same measured survey as your windows and include it in your written scope. Call (561) 475-1246 for a full-opening evaluation.
Can I keep my existing garage door opener with a new impact door?
Sometimes, but impact-rated doors are heavier and may exceed the capacity of openers installed before 2010; we test the balance and weight during our survey and specify opener upgrades only when necessary. The written quote separates required from recommended items so you see the distinction. Call (561) 475-1246 to schedule an assessment.
Custom & Geometric Windows in Lake Park
Custom and geometric windows in Lake Park are not a specialty category here; they are a necessity born of non-standard rough openings from 1950s construction that never anticipated modern impact-rated units. The original Kelsey City plat homes feature arched windows, circular accent openings, and grouped geometric assemblies that cannot be satisfied with stock sizes. We start every Custom & Geometric Windows project with a measured survey you keep, and the written quote cannot differ from that document.
Geometric & Shaped Windows
Signs you need it
Your existing shaped window is single-pane or jalousie, or a previous replacement filled the opening with flat glass that destroyed the original architectural intent.
What it costs in Lake Park
Geometric and shaped impact windows in Lake Park typically range from $1,200 to $3,500 per opening, with trapezoids and polygons at the lower end and true radius or compound curves at the upper end due to template and lamination complexity.
How we do it
We create a full-size template of the existing opening or the specified shape, submit to our manufacturer for custom lamination and framing, receive the unit with Florida Product Approval documentation, and install with field-finished trim that matches the surrounding architecture.
Arched & Curved Windows
Signs you need it
Your arched window has been flat-glazed with a snap-in grid, or the original curved unit has leaked for years due to failed sealant at the radius.
What it costs in Lake Park
Arched and curved impact windows in Lake Park generally run $1,800 to $4,200 per opening, with true divided-lite muntins and custom radius framing at the higher end of that range.
How we do it
We measure the springline, radius, and rise of the existing arch, specify a true curved unit from ViewLux or custom fabrication when necessary, install with pre-formed arched frame and proper flashing integration into the stucco surround, and verify weep drainage before documentation.
What Custom & Geometric Windows Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Geometric / shaped impact window | $1,200 - $3,500 per opening |
| Arched / curved impact window | $1,800 - $4,200 per opening |
| Oversized custom opening (over 60 sq ft) | $4,500 - $9,000 |
How long do custom windows take to manufacture?
Custom geometric and arched impact windows typically require 6-10 weeks from template approval to delivery in Lake Park, compared to 2-4 weeks for standard rectangles. We factor this into your project timeline and coordinate installation sequencing so standard openings are not held waiting. Call (561) 475-1246 to discuss your specific shapes and schedule.
Can you match the original profile of my 1950s windows?
We can match or improve upon the sightline and muntin pattern of most 1950s Lake Park windows using modern impact-rated materials; the measured survey includes photographic documentation of your existing profile, and we review manufacturer options with you before ordering. Call (561) 475-1246 to see sample profiles from CWS and ECO Window Systems.
Brands We Service in Lake Park
We install and service eight verified manufacturer lines in Lake Park: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Parts for CWS, ES Windows, and ECO Window Systems are stocked locally through our Miami coordination office, with most warranty and repair turnaround inside of five business days. See our brands for performance tier and specification details.
Pricing for Windows & Doors in Lake Park, FL
| Service | Typical range in Lake Park |
|---|---|
| Single / double hung impact window | $650 - $1,200 per opening |
| Horizontal roller impact window | $700 - $1,350 per opening |
| Full-home window replacement (10-18 openings) | $8,500 - $22,000 |
| Entry door replacement | $1,800 - $4,500 |
| Hurricane-proof entry door system | $2,200 - $5,500 |
| French / double door set (impact-rated) | $3,500 - $7,500 |
| Low-E / argon upgrade | +$80 - $150 per opening |
| Insulated laminated impact glass | $950 - $1,650 per opening |
| Hurricane-rated garage door (2-car) | $2,800 - $6,500 |
| Geometric / shaped impact window | $1,200 - $3,500 per opening |
| Arched / curved impact window | $1,800 - $4,200 per opening |
| Oversized custom opening | $4,500 - $9,000 |
Prices in Lake Park trend above inland Palm Beach County due to non-standard rough openings, salt-corroded frame repair, and the higher design pressure ratings required for coastal exposure. The written quote you receive before any work starts includes every line item; there are no change orders for conditions we should have found during the measured survey.
Neighborhoods We Serve in Lake Park
We work across Lake Park’s original plat neighborhoods and postwar developments, with scheduling coordinated from our Miami office and crews dispatched to your address. Most Lake Park projects are surveyed within three business days of contact.
- Kelsey City Historic District
- Lake Park Isles
- Paradise Cove
- Sunset Drive area
- North Palm Beach Road corridor
Service Area - Cities Near Lake Park
Our crews serve the northern Palm Beach County coastal corridor including North Palm Beach, FL, West Palm Beach, FL, Palm Beach Gardens, FL, and Jupiter, FL. Permit and inspection coordination is managed by municipality; we handle the jurisdiction-specific requirements for each.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Lake Park
We schedule measured surveys within three business days for Lake Park homeowners facing insurance deadlines, and we prioritize permit pulls for non-renewal cases. The 6-10 week custom manufacturing timeline is the constraint we cannot control; standard sizes move faster. Call (561) 475-1246 with your deadline and we will map a realistic schedule.
Some Lake Park neighborhoods require HOA architectural review before exterior changes; we provide the product data sheets, Florida Product Approval numbers, and renderings needed for most HOA applications, but the homeowner must submit to their specific association. Check your governing documents or ask us to include HOA package preparation in your written scope.
Palm Beach County requires building permits for all exterior window and door replacements in Lake Park’s coastal zone, with separate electrical permits if powered operators or integrated lighting are involved. We pull all required permits, schedule inspections, and include permit costs in your written quote. Call (561) 475-1246 to confirm your specific project requirements.
Call (561) 475-1246 to schedule your free estimate. Every engagement begins with a measured survey you keep, and the written price before any work starts is Haven Clause 1.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Park Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.