Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Lake Park
Sliding and patio door replacement in Lake Park typically runs $2,800-$6,500 for impact-rated units, with most jobs completed in one to two days after permit approval. We’re familiar with the tight Kelsey City lots, shared-wall staging constraints, and non-standard rough openings that define Lake Park’s postwar housing stock. Our crews coordinate dispatch from our South Florida office and carry custom-sizing capability for the jalousie-era frame dimensions found throughout neighborhoods near Kelsey Park and along the Lake Worth Lagoon. Call (561) 475-1246 to schedule your free measured survey. You’ll receive the written price before any work starts, and that document won’t change.
Why Sightline Windows & Doors North Palm Beach Is Lake Park’s Preferred Sliding & Patio Doors Company
We’ve completed hundreds of installations across Palm Beach County’s coastal zone, and Lake Park’s specific conditions, salt-air corrosion rates, and non-standard openings are well-documented in our measured surveys. Our Sliding & Patio Doors in Lake Park customers receive the same Haven Standard treatment as every other engagement: a written quote derived from field measurements they keep, background-checked uniformed technicians with license numbers provided before arrival, and a documented photo record uploaded when the job finishes.
The 365-Day Done Right Promise applies to every Lake Park installation. If the door doesn’t operate, seal, or latch as specified, we make it right. Not as a courtesy, as a clause in the Haven Standard that has governed all 18,000+ openings we’ve touched since 2012.
Calls are answered by a live person, 24/7. Scheduling to Lake Park is coordinated from our Miami office with local crew routing that accounts for the town’s narrow streets and limited staging areas.
Our Sliding & Patio Doors Services in Lake Park

Impact Sliding Glass Doors
Every impact sliding glass door we install in Lake Park must meet Florida Building Code wind-borne debris requirements for the Palm Beach County coastal zone. Non-impact products cannot legally be permitted here. We specify PGT, CGI, and ECO Window Systems impact-rated sliders by performance tier and price range, not by what we have in stock. Because Lake Park’s postwar CBS homes on the Kelsey City plat were built with non-standard rough openings for original jalousie and early aluminum sliders, most impact patio door replacements here need custom-sized or field-modified units rather than standard stock sizes used in newer inland neighborhoods. We replaced a corroded 1962 aluminum slider on a compact CBS home near Kelsey Park with an impact-rated PGT sliding glass door, but the original rough opening was 1.5 inches narrower than a stock unit, so our crew field-modified the jamb and re-stuccoed the perimeter. The homeowner was mid-cancellation on their policy for lacking wind mitigation, and the new unit restored their opening protection credit before the non-renewal deadline.

Patio Doors
Standard patio door installations in Lake Park start around $2,800 for a basic vinyl slider and climb to $5,200 for thermally broken aluminum with Low-E impact glass. The price spread reflects frame material, glazing package, and the degree of rough-opening modification required. Homes near the Lake Worth Lagoon or along Federal Highway experience the most aggressive salt-air exposure, and we specify hardware accordingly. Mr-Glass and Therma-Tru lines offer coastal-grade hardware finishes that resist pitting longer than standard catalog options.

Sliding Glass Door Replacement
Most sliding glass door replacements we perform in Lake Park involve removing corroded aluminum units from the 1960s-1980s. Salt air from the Lake Worth Lagoon pits aluminum slider tracks and seizes multi-point door hardware within 5-8 years, making doors stick or fail to latch. The replacement process includes a full frame inspection, rough-opening measurement against the new unit’s spec sheet, and permit documentation for Palm Beach County coastal-zone compliance. If the original opening is non-standard, we fabricate or modify on site rather than forcing a stock unit that would leak or fail inspection.

Impact French Patio Doors
Impact French patio doors in Lake Park range from $4,200-$6,500 installed, with the upper end covering full aluminum-clad wood units with multi-point locking and impact-rated glazing. These units are popular in Lake Park’s smaller homes where a swinging door pair replaces a failing slider and opens the room to a patio or deck. The outward swing configuration requires careful staging on tight Kelsey City lots, we coordinate material delivery and crew access to minimize neighbor impact and stay within work-hour ordinances.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Lake Park
We draw from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Lake Park’s coastal environment, we most frequently specify ECO Window Systems and Mr-Glass for their salt-air-resistant hardware packages, and Therma-Tru for fiberglass French door slabs that won’t warp or rot in high-humidity conditions. We stock common replacement hardware locally and maintain direct distributor relationships for custom-ordered units. Most standard-impact sliders arrive within 10-14 business days; custom-sized units typically need 3-4 weeks. The measured survey we provide identifies whether your opening accepts stock or requires fabrication, so you’re not waiting on information you should have had at quote.
Common Sliding & Patio Doors Problems We See in Lake Park Homes

- Salt-air corrosion of aluminum tracks and hardware. Bracketed by the Lake Worth Lagoon to the east and less than two miles from the Atlantic, Lake Park experiences salt-air exposure intense enough to pit and seize aluminum frames and corrode multi-point door hardware within five to eight years - a failure rate notably worse than inland Palm Beach County communities like Greenacres. We see this most often in homes near the water that haven’t upgraded to coastal-grade finishes.
- Non-standard rough openings from jalousie-era construction. Original jalousie or early aluminum slider rough openings are non-standard, so standard impact doors won’t fit without custom sizing or field modification, causing leaks and permit rejections. Every replacement requires field verification against the actual frame, not the original blueprints.
- Insurance non-renewal triggered by non-impact openings. Florida insurers have been aggressively non-renewing policies on Lake Park homes that still have jalousie windows, since those louvered panels carry no impact rating and void wind-mitigation credits entirely. Patio door replacement with impact-rated units restores opening protection credits and satisfies underwriter requirements.
- Staging and access constraints on dense Kelsey City lots. Dense lots with shared walls and narrow side setbacks make staging and crane access difficult, leading to rushed installs that miss Florida Building Code coastal-zone wind-borne debris sealing requirements. Our crews plan material delivery, waste removal, and neighbor notification in advance to keep the site clean and the work compliant.
Pricing for Sliding & Patio Doors in Lake Park, FL
Here’s what sliding and patio door work costs in Lake Park’s market:
| Service | Typical Range |
|---|---|
| Standard vinyl patio door (non-impact, where permitted inland only) | $2,200-$3,400 |
| Impact sliding glass door, stock size, aluminum frame | $2,800-$4,200 |
| Impact sliding glass door, custom or field-modified opening | $3,800-$5,500 |
| Impact French patio door pair, installed | $4,200-$6,500 |
| Rough-opening modification and re-stucco | $800-$1,800 |
| Permit and inspection fees (Palm Beach County coastal zone) | $350-$650 |
Three factors push Lake Park jobs toward the higher end: custom sizing for non-standard jalousie-era openings, coastal-grade hardware upgrades for salt-air exposure, and permit complexity for coastal-zone wind-borne debris compliance. The quote you receive after our measured survey is the price on the final invoice. Haven Clause 1: Have it in writing. Call (561) 475-1246 for your free estimate.
We Also Serve Cities Near Lake Park

Our Sliding & Patio Doors crews work throughout northern Palm Beach County, including North Palm Beach, West Palm Beach, Palm Beach Gardens, and Jupiter. Each city’s building department, permit timeline, and typical housing stock differ, and our quotes reflect those local conditions. Lake Park’s Kelsey City plat and coastal exposure create a specific set of constraints we account for in every measured survey.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Lake Park

Most Lake Park homes were built on the original Kelsey City plat with non-standard rough openings for jalousie windows and early aluminum sliders. Stock impact doors are fabricated to common dimensions that rarely match these older frames. Our measured survey identifies the exact opening size and whether field modification or custom fabrication is required. Call (561) 475-1246 to schedule your survey - estimates are free.
Salt air from the Lake Worth Lagoon pits aluminum tracks and corrodes multi-point locking hardware within 5-8 years, causing doors to stick, drag, or fail to latch securely. We specify coastal-grade hardware finishes and thermally broken aluminum frames that resist corrosion longer than standard catalog options. The measured survey includes a hardware condition assessment.
Yes. Replacing non-impact patio doors with Florida Building Code-compliant impact-rated units restores opening protection credits that underwriters require for wind-mitigation discounts. We’ve completed installations for Lake Park homeowners facing imminent policy cancellation, and permit documentation is provided for insurance submission. Call (561) 475-1246 - we can review your non-renewal notice and timeline during the estimate.
All exterior door replacements in Lake Park’s coastal zone require a Palm Beach County building permit with wind-borne debris compliance documentation. We pull permits, schedule inspections, and provide the passed inspection certificate as part of standard scope. The permit process typically adds 5-10 business days to project timeline.
Low-E impact glass with a low SHGC (Solar Heat Gain Coefficient) reduces radiant heat transfer through the door by 40-60% compared to single-pane aluminum sliders common in Lake Park’s older housing stock. In practice, homeowners report noticeably cooler adjacent rooms and reduced AC runtime during summer afternoon loads. The energy performance is documented on the NFRC label affixed to each unit.
Call (561) 475-1246 to schedule your free measured survey. You’ll receive a written price before any work starts, and that document is the same one on the final invoice. Haven Clause 1. No surprises.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Lake Park under the Haven Standard since 2012.










Before
After
Before
After
Before
After