Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Westgate, FL
Window and door installation in Westgate, FL typically costs $650-$4,200 per opening, with most CBS homes requiring concrete modification to accept modern impact-rated units. We’re Sightline Windows & Doors, and we measure every opening with a laser level and digital caliper before writing a price that won’t change. Call (561) 475-1246 to schedule your free measured survey.
Westgate’s mid-century housing stock presents a specific challenge: original jalousie windows set in narrow masonry bucks that predate Florida’s post-Andrew building code. Our crews carry angle grinders and hydraulic chisels as standard equipment, because retrofitting modern glazing into these openings is routine here, not exceptional. Every job starts with a measured survey you keep, and the written quote is the same document.
Why Westgate Homes Are Different
Westgate sits roughly 12 miles inland from the Atlantic, squarely inside Palm Beach County’s wind-borne debris region. The neighborhood’s dense concentration of concrete block structure homes built between the 1950s and 1970s still carries original single-pane aluminum jalousie windows and lightweight exterior doors that offer virtually no hurricane resistance. Unlike newer suburbs to the west, Westgate’s aging single-family stock means we routinely pull original frames from masonry bucks and retrofit impact-rated units into openings never designed for modern glazing dimensions.
The local climate accelerates degradation significantly. Intense UV index, persistent high humidity, and annual tropical storm exposure corrode older aluminum frames and degrade vinyl and rubber seals faster than in drier inland climates. The masonry construction itself fixes rough openings at non-standard dimensions, frequently requiring custom-sized impact windows or on-site concrete modification rather than off-the-shelf units. We’ve found that jalousie windows in older Westgate CBS homes were set into masonry bucks several inches shallower and narrower than any stock impact window on the market today. This isn’t a complication; it’s the standard condition we plan for on every Westgate survey.
Our Main Westgate Services
Westgate homeowners call us most often for window replacement and impact protection. Here is what each service involves in this neighborhood.
Window Replacement in Westgate
Most Westgate window replacement jobs involve removing original jalousie frames from 1950s-1970s masonry bucks, then retrofitting modern impact-rated or energy-efficient units into concrete openings that often require widening or re-bucking. We measure with laser levels and digital calipers, document every reading, and write a price before any work starts. Window Replacement in Westgate covers the full scope, from single hung retrofits to full-home glazing upgrades.
Impact Windows & Doors in Westgate
Westgate properties must meet Florida Building Code requirements for impact-rated openings or approved shutters; the original jalousie and louvered doors common here satisfy neither. We specify PGT, CGI, CWS, or ES Windows products by performance tier and opening requirements, not by margin. Every impact installation includes permit documentation and inspection scheduling. Impact Windows & Doors in Westgate details the full product range and compliance process.
Sliding & Patio Doors in Westgate
Westgate’s mid-century duplexes and single-family homes often feature narrow rear door openings with original lightweight sliding panels that corrode in the humid climate and fail under wind load. We measure the rough opening, specify the correct impact-rated or energy-efficient replacement, and modify masonry bucks when the modern unit requires greater depth or width. Sliding & Patio Doors in Westgate covers multi-panel and 3-lite roller configurations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Westgate
Window installation in Westgate, FL means retrofitting modern glazing into mid-century CBS masonry openings that were never designed for current product dimensions. Most homes here carry original jalousie windows set in narrow concrete bucks; our crews routinely widen or re-buck these openings with angle grinders and hydraulic chisels to accept impact-rated single hung, horizontal roller, or 3-panel sliding units. We begin every engagement with a measured survey you keep, and the written quote cannot differ from that document. Window Installation covers our full methodology across all product categories.
Single & Double Hung Windows
Signs you need it
Original jalousie windows leak air and water, the crank mechanisms have seized, or the single-pane glass shows condensation between failed lites.
What it costs in Westgate
Single and double hung window installation in Westgate typically runs $850-$1,800 per opening, with concrete buck modification adding $200-$400 where the masonry opening requires widening.
How we do it
We remove the jalousie frame, grind or chisel the masonry buck to the correct depth and width, install a new vinyl or aluminum impact-rated frame with integrated sill pan, seal with backer rod and polyurethane, then document the installation with photos you receive.
Horizontal Roller Windows
Signs you need it
Wide openings currently fitted with multiple small jalousie panels that rattle in wind, leak during storms, or cannot accept hurricane shutters.
What it costs in Westgate
Horizontal roller window installation in Westgate typically runs $1,100-$2,400 per opening, with oversize units or those requiring header modification at the higher end.
How we do it
We measure the rough opening with laser level and caliper, remove the existing frame and any corroded fasteners from the masonry, install the impact-rated roller unit with reinforced sill and head flashing, then test operation and seal integrity before photographing the completed work.
What Window Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Single / double hung window | $850 - $1,800 |
| Horizontal roller window | $1,100 - $2,400 |
| Concrete buck modification | $200 - $400 |
Do you pull permits for window installation in Westgate?
Yes. Palm Beach County requires permits for all window replacements that change the opening size or glazing type. We pull the permit, schedule inspections, and pass them before final payment. Call (561) 475-1246 to schedule your free measured survey.
Will the price change once work starts?
No. Haven Clause 1 means the measured survey and the written quote are the same document. If we encounter hidden structural damage during installation, we document it, stop work, and present a revised scope in writing before proceeding. Call (561) 475-1246 for a written price before any work starts.
Door Installation in Westgate
Door installation in Westgate means replacing lightweight, pre-code exterior doors on mid-century CBS homes with impact-rated units that satisfy Florida Building Code wind-borne debris requirements. Original hollow-core or louvered doors common here offer no hurricane resistance and often hang in corroded aluminum frames that have settled with the masonry. We measure every rough opening, specify the correct impact-rated or energy-efficient replacement, and modify concrete bucks when modern units require greater depth. Door Installation details our full process for entry, French, and storm door configurations.
Entry Doors
Signs you need it
The door slab is delaminating, the frame shows daylight around the perimeter, or the lockset no longer seats securely in a corroded strike.
What it costs in Westgate
Entry door installation in Westgate typically runs $1,400-$3,200, with impact-rated fiberglass or steel units and Therma-Tru frames at the higher end of the range.
How we do it
We remove the existing door and frame, inspect the masonry buck for spalling or corrosion, install a pre-hung impact-rated unit with composite or aluminum frame, integrate sill pan and head flashing, then test lockset function and seal integrity.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current front door lacks a Miami-Dade NOA or Florida Product Approval, or your insurance requires documented impact resistance for the opening.
What it costs in Westgate
Hurricane-proof front door installation in Westgate typically runs $2,200-$4,500, with decorative glass inserts and multi-point hardware adding to the base unit cost.
How we do it
We specify the door by NOA number and design pressure rating matched to your home’s exposure, install with reinforced frame anchors into the CBS wall, integrate impact-rated sidelites if specified, and document the approval labels for your insurance file.
What Door Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Standard entry door replacement | $1,400 - $3,200 |
| Hurricane-proof front door | $2,200 - $4,500 |
| Masonry buck modification | $250 - $500 |
Do I need an impact-rated door in Westgate?
Yes, if the door faces an exterior wall and you lack approved shutters. Palm Beach County’s wind-borne debris region requires impact-rated openings or documented protection. We verify the requirement during survey and specify accordingly. Call (561) 475-1246 for a free assessment.
How long does door installation take?
Most single door replacements complete in one day; hurricane-proof units with sidelites or transoms may require two days for proper flashing and seal curing. We schedule inspections before we leave the site. Call (561) 475-1246 to book your measured survey.
Energy-Efficient Windows in Westgate
Energy-efficient window installation in Westgate addresses the specific thermal failure of original single-pane jalousie windows common in 1950s-1970s CBS homes. These units conduct heat directly through uninsulated glass and corroded aluminum frames, while their louvered design seals poorly against the high humidity and intense UV that characterize Palm Beach County’s climate. We specify replacement windows by U-factor and SHGC ratings matched to the local cooling load, not by brand margin. Energy-Efficient Windows details our full specification methodology.
Low-E & Argon Gas Glass
Signs you need it
Rooms with west or south exposure become uninhabitable by midday, or your cooling runs continuously during summer months despite thermostat settings.
What it costs in Westgate
Low-E and argon gas window installation in Westgate typically runs $950-$2,100 per opening, with triple-silver Low-E coatings and krypton upgrade at the higher end.
How we do it
We calculate the solar heat gain coefficient required for each exposure, specify the appropriate Low-E coating and gas fill, install with warm-edge spacers to prevent seal failure in high humidity, and document the NFRC label readings for your records.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows predate the ENERGY STAR program, or your utility bills spike during summer cooling season without thermostat changes.
What it costs in Westgate
ENERGY STAR replacement window installation in Westgate typically runs $1,100-$2,400 per opening, with premium vinyl or composite frames and triple-pane options at the upper range.
How we do it
We verify the ENERGY STAR climate zone specification for South Florida, select windows from our ECO Window Systems or ViewLux lines that exceed the minimum criteria, install with complete air sealing and insulation at the perimeter, and provide the certification documentation for any available rebates.
What Energy-Efficient Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Low-E / argon gas window | $950 - $2,100 |
| ENERGY STAR replacement window | $1,100 - $2,400 |
| Triple-pane upgrade | $300 - $600 per opening |
Will energy-efficient windows lower my cooling bills in Westgate?
Yes, measurably. Original single-pane jalousie windows in Westgate CBS homes typically account for 25-30% of cooling load. We calculate projected savings using your specific glazing specification and orientation. Call (561) 475-1246 for a written estimate with performance projections.
Do energy-efficient windows also meet impact requirements?
Yes, when specified as impact-rated ENERGY STAR units. We select products that carry both certifications, common in our PGT, CWS, and ECO Window Systems lines. The measured survey identifies which openings require impact rating versus energy performance priority. Call (561) 475-1246 to schedule.
Impact Garage Doors in Westgate
Impact garage door installation in Westgate protects a large, often overlooked opening in mid-century CBS homes where original lightweight aluminum or uninsulated steel panels provide no wind-borne debris resistance. The garage door represents the single largest glazed or panelized surface on most homes here, and failure during a tropical event pressurizes the structure and compromises all other openings. We specify wind-load-rated garage doors by design pressure and exposure category, with permit documentation and inspection included. Impact Garage Doors covers our full specification and installation protocol.
Hurricane-Rated Garage Doors
Signs you need it
Your current garage door lacks a visible Florida Product Approval or Miami-Dade NOA label, or the panels flex visibly in moderate wind.
What it costs in Westgate
Hurricane-rated garage door installation in Westgate typically runs $2,800-$5,500 for a single-car opening, with insulated impact-rated panels and heavy-duty track systems at the higher end.
How we do it
We measure the opening and calculate the design pressure for your home’s exposure category, specify the door and track system by NOA number, remove the existing unit, install reinforced vertical and horizontal tracks with proper jamb attachment into the CBS wall, then test cycle and document the approval labels.
Wind-Load Code Compliance
Signs you need it
Your insurance inspection flagged the garage door as non-compliant, or you’re replacing the roof and the building department requires opening protection verification.
What it costs in Westgate
Wind-load code compliance verification and garage door replacement in Westgate typically runs $3,200-$6,200, with structural reinforcement of the jamb and header when the existing framing is inadequate.
How we do it
We inspect the jamb and header for structural adequacy, engineer reinforcement if needed, install the wind-load-rated door and track system, pull the permit, schedule inspection, and provide the compliance documentation for your insurance file.
What Impact Garage Doors Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Hurricane-rated garage door (single car) | $2,800 - $5,500 |
| Wind-load compliance with reinforcement | $3,200 - $6,200 |
| Insulated impact panel upgrade | $400 - $800 |
Does my garage door need to be impact-rated in Westgate?
Yes, if the garage faces an exterior wall and you lack approved shutters. Palm Beach County requires all exterior openings to meet wind-borne debris protection. We verify compliance during survey and specify the correct rating. Call (561) 475-1246 for a free assessment.
Can you reinforce my existing garage door instead of replacing it?
Rarely. Most pre-1992 garage doors in Westgate lack the panel thickness, track strength, and jamb attachment to accept effective reinforcement. We assess structural adequacy during survey and document our findings in writing. Call (561) 475-1246 to schedule.
Custom & Geometric Windows in Westgate
Custom and geometric window installation in Westgate solves the dimension and shape constraints of mid-century CBS masonry openings that stock products cannot fit. Original jalousie windows were often installed in non-standard widths and heights, and some homes feature arched or curved openings from the period’s architectural vocabulary that modern manufacturers do not catalog. We measure with digital caliper and laser level, fabricate to the exact dimension, and modify masonry bucks on-site when the custom unit requires greater depth or altered width. Custom & Geometric Windows details our measurement and fabrication protocol.
Custom Impact Windows
Signs you need it
Your rough opening measures between standard catalog sizes, or the existing frame is embedded in masonry that cannot accept a smaller unit without extensive patching.
What it costs in Westgate
Custom impact window installation in Westgate typically runs $1,400-$3,200 per opening, with non-rectangular shapes, divided lite patterns, or oversized dimensions at the higher end.
How we do it
We take three measurements per dimension at top, middle, and bottom, fabricate the vinyl or aluminum frame to the tightest reading with integrated adjustment clearance, modify the masonry buck if needed, and install with custom sill pan and head flashing fabricated on-site.
Arched & Curved Windows
Signs you need it
Your home features original arched or radius-top openings from the 1950s-1970s, or you’re replacing a rectangular unit in an arched masonry buck that was later modified.
What it costs in Westgate
Arched and curved window installation in Westgate typically runs $2,200-$4,800 per opening, with true radius construction and impact-rated laminated glass at the upper range.
How we do it
We template the radius with a digital measuring system, fabricate the curved frame and sash at our partner facility, install with custom flashing that follows the arch profile, and integrate the unit with adjacent rectangular windows where the opening combines shapes.
What Custom & Geometric Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Custom impact window (rectangular) | $1,400 - $3,200 |
| Arched / curved window | $2,200 - $4,800 |
| Oversized opening (over 40 sq ft) | $3,500 - $6,500 |
How long does custom window fabrication take?
Typically 4-6 weeks from measured survey to installation, with arched or curved units at the longer end. We schedule installation before fabrication completes to avoid delay. Call (561) 475-1246 to start your measured survey.
Can you match custom windows to my existing jalousie openings?
Yes, though the new unit will be deeper and require masonry modification. We document the existing sightlines and muntin patterns, then replicate the visual rhythm with modern framing and impact-rated glass. Call (561) 475-1246 for a written specification.
Brands We Service in Westgate
We specify from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Westgate’s climate and code requirements, we frequently draw on ECO Window Systems for energy-efficient vinyl impact units, Therma-Tru for fiberglass entry door slabs, and ViewLux for custom geometric shapes. We stock common hardware and weatherstrip locally, and most non-custom parts arrive within 48 hours. our brands
Pricing for Windows & Doors in Westgate, FL
| Service | Typical range in Westgate |
|---|---|
| Single / double hung window | $850 - $1,800 |
| Horizontal roller window | $1,100 - $2,400 |
| Standard entry door | $1,400 - $3,200 |
| Hurricane-proof front door | $2,200 - $4,500 |
| Low-E / argon gas window | $950 - $2,100 |
| ENERGY STAR replacement window | $1,100 - $2,400 |
| Hurricane-rated garage door (single car) | $2,800 - $5,500 |
| Custom impact window (rectangular) | $1,400 - $3,200 |
| Arched / curved window | $2,200 - $4,800 |
| Concrete buck modification | $200 - $500 |
Prices in Westgate push higher when masonry bucks require significant modification, when openings are non-standard dimensions requiring custom fabrication, or when structural reinforcement of jambs and headers is needed for wind-load compliance. Haven Clause 1 means the price we write after survey is the price on the final invoice; we do not estimate and adjust later.
Neighborhoods We Serve in Westgate
We serve the full Westgate census-designated place and adjacent unincorporated areas. Crews dispatch from our Miami office and typically arrive within scheduled windows across this corridor. Scheduling is coordinated for Westgate specifically, not routed through distant hubs.
- Westgate proper (core residential)
- Westgate Heights
- Belvedere Homes
- Golden Lakes
- Century Village (perimeter service)
Service Area - Cities Near Westgate
We install and replace windows and doors across Palm Beach County and surrounding areas. Nearby cities we serve include North Palm Beach, FL, Lake Park, FL, West Palm Beach, FL, and Palm Beach Gardens, FL. Dispatch and scheduling are coordinated from our Miami office; crews serve all listed areas with the same measured survey and written pricing protocol.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Westgate
Yes. Palm Beach County requires permits for all window replacements that alter the opening size, glazing type, or impact rating. We pull the permit, schedule inspections, and pass them before final payment. The permit documentation becomes part of your Haven Standard file.
Clear access to all windows and doors you want assessed, and have any prior inspection reports or insurance requirements available. We bring our own ladders and measuring equipment. The survey takes 45-90 minutes for a typical Westgate single-family home, and you keep the measured document.
Yes, when the property falls under HOA jurisdiction. We document the architectural review requirements, submit product samples and specifications as required, and schedule installation only after written approval. The Haven Standard file includes all HOA correspondence for your records.
Call (561) 475-1246 to schedule your free measured survey. We’ll bring the laser level, write the price, and leave you with a document that won’t change.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westgate Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.