Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Palm Beach
Sliding and patio door installation and replacement in Palm Beach runs $2,800-$8,500 depending on whether the project involves a standard vinyl slider, a custom impact-rated unit, or a landmark-compliant replica of a 1920s-1940s Mizner-era opening. Most Palm Beach homeowners receive a written, line-item quote within 48 hours of our measured survey, and the price on that document does not change once work begins.
We serve Palm Beach from our Miami office, with crews dispatched directly to homes from Worth Avenue to South Ocean Boulevard. Our Sliding & Patio Doors team has worked the island’s barrier-island conditions long enough to know that standard inland specs fail here. Call (561) 475-1246 to schedule your free measured survey and written estimate.
Why Sightline Windows & Doors North Palm Beach Is Palm Beach’s Preferred Sliding & Patio Doors Company
Sightline has installed and replaced more than 18,000 windows and doors since 2012, every one with a written price before any tool was lifted and a documented photo record when the job finished. In Palm Beach specifically, our crews have handled the dual compliance challenge that defines this market: Florida Building Code impact requirements enforced by the same salt air that corrodes standard frames, plus the Town of Palm Beach Architectural Commission’s mandate that landmark properties match original Mizner-era profiles exactly.
Palm Beach customers find us because we publish pricing ranges on the page, answer the phone with a live person 24/7, and send background-checked, uniformed technicians who arrive with license numbers visible. Our 365-Day Done Right Promise is written into the Haven Standard, not offered as a courtesy. If it’s not done right, we make it right.
Response time to Palm Beach is typically next-day for measured surveys, with written quotes following within 24 hours. We don’t quote over the phone - Haven Clause 1 requires a measured survey that the customer keeps, and the written scope derived from it is the final invoice.
Our Sliding & Patio Doors Services in Palm Beach

Patio Doors
Standard patio door replacement in Palm Beach starts around $2,800-$4,200 for a quality vinyl or aluminum unit with basic impact glazing. But “standard” is a narrow category on this island. Most Palm Beach homes built between 1920 and 1940 carry original steel casement or heavy wood door frames with arched masonry openings that won’t accept a stock slider without custom fabrication. We measure the jamb depth, sightline, and opening geometry on every job, then specify from our eight manufacturer lines - ECO Window Systems, Therma-Tru, ViewLux, and others - based on what the opening requires, not what is in stock.

Impact Sliding Glass Doors
Impact sliding glass doors in Palm Beach run $4,500-$7,200 for most residential openings, with large-format or multi-panel systems reaching the upper end. Every unit must meet or exceed Florida Building Code design pressure ratings for the coastal exposure zone, which Palm Beach occupies. We specify laminated glass interlayers rated to large-missile impact standards, marine-grade anodized or PVF2-coated frames, and stainless-steel rollers and hardware. The salt-laden air from both the Atlantic and the Intracoastal attacks standard inland-grade aluminum from two directions simultaneously. Marine-grade finishes aren’t an upgrade here. They’re the baseline for a door that lasts.

Sliding Glass Door Replacement
Sliding glass door replacement in Palm Beach costs $3,200-$6,800 depending on frame material, glass package, and whether the original opening requires structural modification. Failed rollers, corroded tracks, and fogged insulated glass units are the common triggers. We document the existing condition with photos the customer receives, then provide a written scope that includes disposal of the old unit, any sill or jamb repair, and the new door installed to manufacturer specification. The price is fixed before we order.

Impact French Patio Doors
Impact French patio doors in Palm Beach range from $5,200-$8,500 for hinged or sliding configurations with true divided lites, custom grille patterns, or arched tops. These are often the only acceptable replacement on landmark-designated properties where ARCOM requires mullion profiles and hardware finishes matched to historic documentation. We source custom units from PGT, CGI, and other lines with the fabrication capability to replicate period details while delivering modern impact performance. Lead times on these doors run 8-14 weeks, and the calendar is set by the manufacturer, not by our labor schedule.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Palm Beach
We specify from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - matched to the performance tier and price range each Palm Beach opening demands. For barrier-island homes, we default to lines with marine-grade anodized frame options and stainless hardware availability. We don’t push inventory. We order what the measured survey specifies, and we fix the price in writing before placing that order. Local parts availability means faster turnaround on standard units; custom fabrication timelines are quoted upfront and don’t shift once approved.
Common Sliding & Patio Doors Problems We See in Palm Beach Homes

- Double-sided salt corrosion on standard aluminum frames. Because Palm Beach sits on a barrier island less than half a mile wide, patio door frames corrode from salt spray on both the ocean-facing and Intracoastal-facing elevations simultaneously - a corrosion load that inland Palm Beach County cities never see. Marine-grade anodized or PVF2-coated frames and stainless-steel hardware are the baseline here, not an upgrade.
- ARCOM permit stalls on landmark properties. Skip the pre-approval step on a Town-designated landmark and the project halts for months. The Architectural Commission meets on a fixed schedule and will reject any mullion profile, glass tint, or hardware finish that doesn’t match historic documentation. Out-of-town window companies routinely underestimate this process.
- Failed retrofits into 1920s-1940s steel casement or arched masonry openings. Try to fit a modern impact-rated sliding door without custom fabrication and the design pressure and wind mitigation numbers won’t line up with the original jamb depth or opening geometry. We measure twice and fabricate once.
- Corroded rollers and tracks from sand infiltration. Beachfront homes on South Ocean Boulevard and near Midtown Beach see accelerated wear on sliding door hardware from wind-driven sand. Stainless-steel rollers and sealed bearing systems outlast standard components by years in this environment.
Pricing for Sliding & Patio Doors in Palm Beach, FL
Here’s what sliding and patio door work costs in the Palm Beach market:
| Service | Typical Range |
|---|---|
| Standard patio door replacement (vinyl/aluminum) | $2,800 - $4,200 |
| Impact sliding glass door (standard opening) | $4,500 - $7,200 |
| Sliding glass door replacement (with sill/jamb repair) | $3,200 - $6,800 |
| Impact French patio door (custom/landmark) | $5,200 - $8,500 |
| Screen door installation (companion unit) | $380 - $650 |
What moves the number: frame material (vinyl, aluminum, thermally broken aluminum, wood-clad), glass package (impact-rated laminated, low-E coating, tint), hardware grade (standard vs. stainless marine), and whether the opening requires structural modification or custom arched fabrication. Landmark compliance work adds ARCOM documentation time but not hidden fees - the scope is written before ordering.
Every estimate is free. Bring a competitor’s written quote and we’ll review it at no charge - our Free Second Opinion on Any Written Estimate. Call (561) 475-1246 to schedule your measured survey.
We Also Serve Cities Near Palm Beach

Our crews work throughout Palm Beach County from the same Miami coordination office, with regular projects in Palm Beach, West Palm Beach, North Palm Beach, Greenacres, and Palm Beach Gardens. Each city has distinct code enforcement, wind zone ratings, and housing stock conditions; we specify accordingly rather than applying a single template.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Palm Beach

Yes. The Town of Palm Beach Architectural Commission requires pre-approval of mullion profiles, glass tint, and hardware finishes on any designated landmark property before a building permit is issued. We submit documentation to ARCOM as part of our measured survey process, and we do not order custom fabrication until that approval is in hand. Call (561) 475-1246 and we’ll walk you through the timeline on your specific property.
Palm Beach’s barrier-island geography exposes every home to salt-laden air from both the Atlantic Ocean and the Intracoastal Waterway simultaneously, accelerating corrosion of standard aluminum and steel components. Inland Palm Beach County cities see only fractional salt exposure by comparison. Marine-grade anodized or PVF2-coated frames and stainless-steel hardware are the minimum specification we use on any Palm Beach installation. Call (561) 475-1246 for a written quote that names the exact materials for your elevation.
The calendar is set by the door, not by our labor. Standard impact sliding doors ship in 4-6 weeks; custom units with arched tops, historic mullion profiles, or non-standard dimensions run 8-14 weeks depending on the manufacturer. We fix the price in writing before placing the order, then coordinate installation around confirmed delivery. No crew is scheduled until the unit is in hand. Call (561) 475-1246 to discuss lead times on your specific configuration.
Yes, with custom fabrication. We recently replaced a failed 1990s aluminum slider on a 1938 Mizner-era estate off South Ocean Boulevard with a custom PGT impact sliding glass door built to match the original arched masonry opening - marine-grade anodized frame, stainless rollers and hardware, laminated glass interlayer rated to large-missile standards. The homeowner had been told by two out-of-town companies that “any impact slider would work,” but ARCOM required us to submit mullion profile drawings, low-E glass tint samples, and hardware finish samples before the permit was released. We fixed the price in writing before placing the order, then waited out the custom lead time rather than juggling crews. Call (561) 475-1246 to schedule a measured survey of your historic opening.
Yes, if the installation is documented with a wind mitigation inspection showing the door meets or exceeds the Florida Building Code design pressure for your exposure zone. Palm Beach’s coastal location places most homes in the highest exposure category, so the rating matters. We provide product approval documentation and photo evidence of proper installation for your inspector. Call (561) 475-1246 to confirm the specific credit available under your policy.
Written by Sonia Raman, Owner at Sightline Windows & Doors North Palm Beach, serving Palm Beach since 2012 under the Haven Standard.










Before
After
Before
After
Before
After