Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Royal Palm Beach, FL
Window installation in Royal Palm Beach typically runs $650-$1,400 per opening for standard vinyl or aluminum impact-rated units, with most whole-home jobs spanning 12-20 openings in the village’s 1970s-1990s tract housing stock. Because every replacement permit triggers full Florida Building Code compliance in this 140-mph wind-borne debris zone, no like-for-like swap is possible on pre-1994 homes. Crews from our Miami office serve Royal Palm Beach directly, and we schedule measured surveys that produce the written price you’ll hold before any work starts. Call (561) 475-1246 to arrange yours.
Why Royal Palm Beach Homes Are Different
Royal Palm Beach’s residential boom concentrated in the 1970s through early 1990s left the village with a dominant housing stock of pre-Hurricane Andrew, single-pane aluminum-frame windows and hollow-core doors that predate Palm Beach County’s current wind-borne debris region code requirements. Because RPB sits entirely within that wind-borne debris zone at roughly 140-mph design wind speeds, a permit for any window or door replacement triggers full compliance with current Florida Building Code - meaning no pre-1994 home can do a like-for-like swap, and virtually every job becomes a whole-home impact-glass or storm-panel upgrade.
The village is overwhelmingly concrete-block-structure (CBS) ranch and two-story tract homes built between the mid-1970s and early 1990s in planned, deed-restricted subdivisions. Original fenestration is typically aluminum single-pane horizontal sliders and jalousie windows - products that are both thermally inefficient in South Florida’s heat and wholly inadequate under current wind-load standards. Sitting roughly 12 miles inland from the Atlantic, Royal Palm Beach avoids the worst salt-spray corrosion that destroys hardware on coastal Palm Beach or Singer Island, but it sits squarely in the path of westward-tracking tropical systems that funnel through the flat Glades terrain with little topographic break - making sustained wind loads and wind-driven rain intrusion around door thresholds a recurring failure point during storm season. Technicians working the older sections off Okeechobee Boulevard and Southern Boulevard regularly encounter original jalousie windows on screened-porch and Florida-room enclosures - glass-louver systems that effectively provide zero wind or water resistance and are no longer code-compliant for enclosed living space, making them a frequent first conversation point when homeowners call about “just one leaky window.”
Our Main Royal Palm Beach Services
Most Royal Palm Beach homeowners who reach us start with one of these three projects, each with its own dedicated page and local pricing.
Window Replacement in Royal Palm Beach
Whole-home window replacement in Royal Palm Beach means removing single-pane aluminum sliders or jalousie units and installing impact-rated, code-compliant products that meet the 140-mph wind-borne debris requirements. We measure every opening to the nearest 1/8 inch, document frame conditions in CBS walls common to RPB’s 1970s-1990s subdivisions, and specify products from our eight manufacturer lines by performance tier and price range. Window Replacement in Royal Palm Beach covers measured survey pricing, permit handling, and the documented photo record you receive at completion.
Impact Windows & Doors in Royal Palm Beach
Every permit-pulled replacement in Royal Palm Beach’s wind-borne debris zone must meet current impact standards, so “impact-rated” is not an upgrade here - it is the baseline. We specify laminated glass packages, reinforced frames, and Miami-Dade or Florida Product Approved hardware that satisfies Palm Beach County building officials. Impact Windows & Doors in Royal Palm Beach details our specification process, the eight manufacturer lines we draw from, and how the Haven Standard governs every installation.
Sliding & Patio Doors in Royal Palm Beach
Patio door replacement in Royal Palm Beach addresses a specific failure mode: wind-driven rain intrusion at thresholds on west-facing rear walls, where Glades-tracking storms push water under single-rail systems never designed for sustained pressure. We specify multi-point locking hardware, raised thresholds with integrated drainage, and impact-rated glass packages sized to the larger openings common in RPB’s ranch and two-story plans. Sliding & Patio Doors in Royal Palm Beach covers measured survey methods, product selection by performance tier, and permit coordination.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Royal Palm Beach
Window installation in Royal Palm Beach starts with a structural reality: the village’s 1970s-1990s CBS tract homes were built with single-pane aluminum horizontal sliders and jalousie windows that fail on two counts - thermal performance and wind-borne debris resistance. Every permit-pulled replacement must meet current Florida Building Code for this 140-mph zone, which means the measured survey we perform becomes the specification document, and the written quote derived from it cannot change. Window Installation across our service area follows this same Haven Standard protocol, but Royal Palm Beach’s housing era and inland wind exposure create specific product and installation requirements our crews address on every job.
Horizontal Roller Windows
Signs you need it
Original aluminum single-pane rollers off Okeechobee Boulevard stick in their tracks, show daylight at the meeting rail, or rattle in moderate winds - all indicators the sash wheels and weatherstripping have failed beyond repair.
What it costs in Royal Palm Beach
Horizontal roller window installation in Royal Palm Beach typically ranges $720-$1,250 per opening for vinyl or aluminum impact-rated units, with multi-slide or oversized openings running higher.
How we do it
We remove the existing frame, inspect the CBS rough opening for moisture intrusion at the sill, install a flashed pan with integrated drainage, set the new impact-rated unit plumb and square, and seal with backer rod and structural sealant before documenting the installation with photos you receive.
3-Panel Sliding (3-Lite Roller) Windows
Signs you need it
Florida-room and rear-wall openings in RPB’s ranch homes still fitted with jalousie or fixed-glass panels show condensation between failed panes, or the homeowner wants operable ventilation without sacrificing the view width.
What it costs in Royal Palm Beach
3-panel sliding window installation in Royal Palm Beach typically ranges $1,400-$2,600 per opening depending on frame material, glass package, and whether the existing header requires reinforcement for the increased span.
How we do it
We verify the header capacity for the wider span, remove the existing fenestration and any non-compliant jalousie hardware, install the three-panel impact-rated system with tandem rollers and multi-point lock, and test operation under load before recording the final sightline measurements.
What Window Installation Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Standard horizontal roller (vinyl frame, impact-rated) | $720 - $1,250 |
| 3-panel sliding window (3-lite roller, impact-rated) | $1,400 - $2,600 |
| Whole-home installation (12-20 openings, typical RPB tract home) | $8,600 - $22,000 |
Do I need a permit for window replacement in Royal Palm Beach?
Yes. Palm Beach County requires a building permit for every window replacement in Royal Palm Beach’s wind-borne debris zone, and the inspector will verify impact-rated product approval, proper fastening to CBS structure, and sealed penetrations. We pull permits as standard on every job and schedule inspections; the permit cost is itemized in your written quote. Call (561) 475-1246 to schedule your free measured survey.
How long does window installation take in Royal Palm Beach?
Most Royal Palm Beach whole-home jobs complete in 2-4 working days, with single openings done in one day; scheduling depends on permit approval from Palm Beach County, which typically takes 5-10 business days for window replacements. We coordinate permit submission and inspection scheduling from our Miami office and confirm your installation dates in writing. Call (561) 475-1246 for current availability.
Door Installation in Royal Palm Beach
Door installation in Royal Palm Beach addresses a specific vulnerability in the village’s 1970s-1990s housing stock: hollow-core entry doors and un-reinforced patio door systems that predate current wind-load and wind-driven rain standards. The flat Glades terrain west of Royal Palm Beach funnels sustained winds and heavy rain against west and northwest exposures, making threshold sealing and multi-point locking hardware critical to performance. Door Installation across our service area follows the same measured-survey protocol, but Royal Palm Beach’s inland storm track and CBS construction require specific flashing and fastening methods our crews apply on every job.
Hurricane-Proof Front & Entry Doors
Signs you need it
The existing entry door shows delamination at the bottom rail, the jamb flexes when latched, or light is visible at the threshold - all indicating the unit lacks the reinforced core and perimeter sealing required for 140-mph wind-borne debris protection.
What it costs in Royal Palm Beach
Hurricane-proof front door installation in Royal Palm Beach typically ranges $1,800-$3,500 for a fiberglass or steel impact-rated unit with multi-point hardware, with decorative glass inserts and sidelite configurations running higher.
How we do it
We remove the existing door and frame, inspect the CBS rough opening for plumb and moisture damage, install a composite or aluminum-clad frame with integrated threshold pan and end dams, hang the impact-rated slab with adjustable hinges, and adjust the multi-point lock for uniform compression before documenting the installation.
French & Double Doors
Signs you need it
Double-door units on Royal Palm Beach rear walls show water staining at the center meeting stile, the inactive door drifts in wind, or the astragal seal has compressed to the point of leaking during summer thunderstorms.
What it costs in Royal Palm Beach
French and double door installation in Royal Palm Beach typically ranges $2,400-$4,800 for impact-rated units, with out-swing configurations and retractable screen systems adding to the total depending on manufacturer and size.
How we do it
We verify header capacity for the paired opening, remove the existing doors and track system, install the new impact-rated frame with adjustable sill cap and drainage provisions, align both slabs for consistent reveal and proper astragal engagement, and test the multi-point lock and weatherstrip compression before recording final measurements.
What Door Installation Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Hurricane-proof front door (fiberglass/steel, impact-rated) | $1,800 - $3,500 |
| French or double door (impact-rated, standard size) | $2,400 - $4,800 |
| Entry door with sidelites (impact-rated, full system) | $3,200 - $6,000 |
Can I replace just my door slab without changing the frame in Royal Palm Beach?
No. Palm Beach County’s wind-borne debris requirements mandate that the entire door system - slab, frame, threshold, and hardware - meet current Florida Building Code and bear the appropriate product approval; a slab-only replacement will not pass inspection. We specify complete systems from Therma-Tru and other verified lines, with the full scope itemized in your written quote. Call (561) 475-1246 for a measured survey.
What door material holds up best in Royal Palm Beach’s climate?
Fiberglass entry doors with composite frames resist the heat and humidity cycles of inland Palm Beach County better than steel, which can sweat and corrode at the bottom rail, or wood, which requires maintenance that most homeowners defer. We specify Therma-Tru fiberglass systems with composite frames as our standard for Royal Palm Beach, with steel available on request for specific security requirements. Call (561) 475-1246 to discuss your opening.
Energy-Efficient Windows in Royal Palm Beach
Energy-efficient window replacement in Royal Palm Beach targets the thermal penalty of single-pane aluminum frames common to the village’s 1970s-1990s subdivisions - units that conduct heat into conditioned space and drive cooling loads well above what modern glazing packages allow. Because every replacement must also satisfy impact requirements in this 140-mph zone, we specify products that address both performance goals simultaneously rather than treating efficiency as an add-on. Energy-Efficient Windows across our service area follow this dual-performance approach, with Royal Palm Beach’s inland heat exposure and older housing stock making the efficiency gains particularly measurable on utility bills.
Low-E & Argon Gas Glass
Signs you need it
Floors and furniture near south- and west-facing windows in Royal Palm Beach homes stay uncomfortably warm through afternoon hours, or the existing glass shows no Low-E coating tint when viewed at an angle - indicating bare single-pane or early clear-glass units.
What it costs in Royal Palm Beach
Low-E and argon gas window installation in Royal Palm Beach typically ranges $780-$1,380 per opening for impact-rated vinyl or aluminum units with spectrally selective coatings, with triple-silver Low-E upgrades adding 10-15 percent.
How we do it
We measure each opening’s solar heat gain coefficient requirement based on orientation and shading, specify the appropriate Low-E coating and argon fill from our manufacturer lines, install the insulated laminated unit with warm-edge spacer, and record the U-factor and SHGC values on your documentation.
Insulated Laminated Glass
Signs you need it
Condensation forms on the interior of single-pane windows during Royal Palm Beach’s humid mornings, or the homeowner has added interior storm panels that trap moisture and accelerate frame corrosion on original aluminum units.
What it costs in Royal Palm Beach
Insulated laminated glass window installation in Royal Palm Beach typically ranges $850-$1,520 per opening, combining the air gap insulation of a dual-pane system with the impact resistance and sound dampening of laminated outer lite construction.
How we do it
We remove the existing single-pane unit, inspect the CBS frame for thermal bridging paths, install the insulated laminated system with composite or thermally broken aluminum frame, seal all perimeter joints with backer rod and low-permeability sealant, and verify the assembly’s condensation resistance factor before final documentation.
What Energy-Efficient Windows Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Low-E/argon vinyl window (impact-rated, standard opening) | $780 - $1,380 |
| Insulated laminated glass window (impact-rated, thermal break frame) | $850 - $1,520 |
| Whole-home efficiency upgrade (12-20 openings, typical RPB home) | $9,400 - $26,000 |
Will energy-efficient windows lower my electric bill in Royal Palm Beach?
Yes. Replacing single-pane aluminum windows with Low-E, argon-filled impact-rated units typically reduces cooling load by 15-25 percent in Royal Palm Beach’s concrete-block homes, with payback periods of 6-10 years depending on utility rates and existing HVAC efficiency. We calculate estimated annual savings from your specific opening count and orientation during the measured survey. Call (561) 475-1246 for a written estimate with savings projection.
Do impact-rated windows also qualify as energy-efficient in Royal Palm Beach?
They must, because every replacement window in Royal Palm Beach’s wind-borne debris zone is required to be impact-rated, and we specify only products that also meet or exceed ENERGY STAR criteria for South Florida climate zone - typically dual-pane with Low-E coating and warm-edge spacer as minimum. The impact requirement does not preclude efficiency; we select from manufacturer lines that deliver both. Call (561) 475-1246 to review specifications.
Impact Garage Doors in Royal Palm Beach
Impact garage door installation in Royal Palm Beach addresses a code gap: many village homes built in the 1970s-1990s have garage doors never engineered for wind-borne debris impact, and the large opening represents a significant breach in the building envelope during tropical systems tracking west from the Glades. Because the garage often shares a roof structure with conditioned space in RPB’s ranch and two-story plans, door failure can lead to progressive structural damage beyond the garage itself. Impact Garage Doors across our service area follow the same wind-load engineering and installation protocols, with Royal Palm Beach’s 140-mph design requirement and flat-terrain wind exposure demanding specific track and reinforcement specifications.
Hurricane-Rated Garage Doors
Signs you need it
The existing garage door flexes visibly in moderate winds, lacks a Miami-Dade or Florida Product Approval label, or the homeowner has been advised by an insurer or inspector that the current unit does not satisfy wind-borne debris requirements for the address.
What it costs in Royal Palm Beach
Hurricane-rated garage door installation in Royal Palm Beach typically ranges $1,600-$3,200 for a single-car impact-rated steel or aluminum door with reinforced track and heavy-duty hardware, with wind-load ratings from 140 mph to 170 mph depending on exposure category.
How we do it
We verify the door size and wind-load requirement from Palm Beach County’s exposure map, remove the existing door and track system, install the reinforced vertical track with jamb brackets anchored to CBS block, hang the impact-rated curtain with tamper-resistant rollers, and test the spring balance and auto-reverse before documenting the installation.
Wind-Load Code Compliance
Signs you need it
A permit application for other work triggered a garage door inspection that failed, or the homeowner is selling and the buyer’s inspector flagged the garage door as non-compliant with current Florida Building Code wind-load provisions.
What it costs in Royal Palm Beach
Wind-load code compliance garage door work in Royal Palm Beach typically ranges $1,200-$2,800 for track reinforcement, hardware upgrade, and door replacement as needed to satisfy inspection, with full door replacement pushing the total toward the higher end.
How we do it
We assess the existing door and track against the required wind-load pressure, engineer a reinforcement or replacement plan, install Miami-Dade or Florida Product Approved components with proper fastening to structure, and coordinate inspection with Palm Beach County building officials before final documentation.
What Impact Garage Doors Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Hurricane-rated garage door (single-car, impact-rated steel) | $1,600 - $3,200 |
| Wind-load code compliance (track/hardware upgrade, possible door replacement) | $1,200 - $2,800 |
| Double-car hurricane-rated door with reinforced track system | $2,400 - $4,600 |
Does my garage door need to be impact-rated if I’m not replacing windows?
If you pull a permit for any window or door replacement in Royal Palm Beach, the inspector may flag a non-compliant garage door as a related deficiency requiring correction before final approval; even standalone garage door replacement requires impact-rated product approval in this wind-borne debris zone. We assess the full envelope during our measured survey and itemize any garage door work in the written scope. Call (561) 475-1246 for evaluation.
Can I add a garage door opener to an impact-rated door?
Yes, but the opener must be rated for the heavier curtain weight of impact-rated doors and installed with proper header reinforcement and safety entrapment devices per current code; standard openers often lack the torque and safety features for hurricane-rated units. We specify opener packages matched to the door weight and cycle requirements, with installation included in the written quote. Call (561) 475-1246 for specifications.
Custom & Geometric Windows in Royal Palm Beach
Custom and geometric window installation in Royal Palm Beach serves two distinct needs in the village’s older housing stock: replacing original shaped or oversized openings that cannot accept standard stock sizes, and upgrading Florida-room and entryway features with impact-rated products that maintain the architectural character homeowners want preserved. Because RPB’s 1970s-1990s subdivisions include ranch plans with arched windows, octagonal accents, and large fixed-glass features, custom fabrication is often the only compliant path. Custom & Geometric Windows across our service area follow the same templated measurement and factory-verification process, with Royal Palm Beach’s specific opening sizes and HOA aesthetic requirements creating additional specification layers our survey captures.
Arched & Curved Windows
Signs you need it
The existing arched window above the front entry or in the living room shows seal failure with fogging at the radius, or the original single-pane curved unit was never impact-rated and cannot be replaced with a rectangular stock size without destroying the opening’s proportions.
What it costs in Royal Palm Beach
Arched and curved window installation in Royal Palm Beach typically ranges $1,400-$3,200 per opening for custom-fabricated impact-rated units with radius or segment-head geometry, with pricing dependent on radius complexity and whether the frame requires site-built curvature matching.
How we do it
We create a full-size template of the existing arched opening, verify the radius and spring-line dimensions to 1/16 inch, transmit the template to the factory for CAD verification against the specified product line, receive the custom unit with pre-formed frame, and install with integrated flashing compatible with the CBS substrate.
Oversized Openings
Signs you need it
Florida-room or great-room windows in Royal Palm Beach homes exceed the maximum stock size of 60 by 96 inches, requiring either a custom monolithic unit or a properly mulled assembly that maintains impact rating and thermal performance across the span.
What it costs in Royal Palm Beach
Oversized window installation in Royal Palm Beach typically ranges $2,200-$5,400 per opening for custom or mulled impact-rated units, with structural reinforcement of the header and sill, and specialized lifting equipment for units exceeding 150 pounds.
How we do it
We verify the rough opening dimensions and structural capacity, engineer a custom unit or mulled assembly from ECO Window Systems or Mr-Glass lines with documented load path, coordinate crane or specialized handling for large units, install with continuous perimeter anchorage to CBS structure, and seal with structural silicone and backer rod before photographic documentation.
What Custom & Geometric Windows Costs in Royal Palm Beach
| Item | Typical range in Royal Palm Beach |
|---|---|
| Arched or curved window (custom-fabricated, impact-rated) | $1,400 - $3,200 |
| Oversized opening (custom or mulled, impact-rated) | $2,200 - $5,400 |
| Geometric accent window (octagonal, triangular, custom shape) | $1,100 - $2,800 |
How long does custom window fabrication take for Royal Palm Beach?
Custom and geometric windows typically require 4-8 weeks from measured survey to delivery, depending on the manufacturer line and complexity of the radius or custom shape; we verify the production schedule during specification and coordinate installation once the unit arrives and passes factory inspection. The measured survey and written quote, including timeline, are completed before any deposit is taken. Call (561) 475-1246 to schedule survey.
Will my HOA approve custom window shapes in Royal Palm Beach?
Most Royal Palm Beach deed-restricted subdivisions require architectural review for changes to window size, shape, or exterior appearance; we provide product drawings, finish samples, and Miami-Dade or Florida Product Approval documentation as part of the submittal package you present to your HOA, and we adjust specifications if the board requires aesthetic matching. Call (561) 475-1246 to discuss your specific HOA requirements.
Brands We Service in Royal Palm Beach
We install and service eight verified manufacturer lines in Royal Palm Beach - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - with parts and hardware stocked for common repairs and warranty service. Turnaround on standard components is typically same-week; custom glass or frame extrusions follow factory lead times. See our brands for specification details by performance tier and price range.
Pricing for Windows & Doors in Royal Palm Beach, FL
| Service | Typical range in Royal Palm Beach |
|---|---|
| Standard horizontal roller window (impact-rated) | $720 - $1,250 |
| 3-panel sliding window (impact-rated) | $1,400 - $2,600 |
| Hurricane-proof front door (impact-rated) | $1,800 - $3,500 |
| French or double door (impact-rated) | $2,400 - $4,800 |
| Low-E/argon energy-efficient window (impact-rated) | $780 - $1,380 |
| Insulated laminated glass window (impact-rated) | $850 - $1,520 |
| Hurricane-rated garage door (single-car) | $1,600 - $3,200 |
| Wind-load garage door compliance work | $1,200 - $2,800 |
| Arched or curved custom window (impact-rated) | $1,400 - $3,200 |
| Oversized custom or mulled window (impact-rated) | $2,200 - $5,400 |
Prices in Royal Palm Beach increase with opening size, header reinforcement requirements, and finish upgrades such as woodgrain laminate or custom paint match; every quote is written and itemized before work starts, with no change orders permitted except for homeowner-requested scope additions documented in writing. Haven Clause 1 governs every engagement: the measurement and the price are the same document.
Neighborhoods We Serve in Royal Palm Beach
Crews serve Royal Palm Beach directly from our Miami office, with scheduling coordinated for subdivisions across the village. Response time for measured surveys is typically within 3-5 business days of your call.
- Crestwood
- Saratoga at Royal Palm
- The Crescent
- Baywinds
- Victoria Grove
Service Area - Cities Near Royal Palm Beach
We install and replace windows and doors throughout central Palm Beach County, with measured survey and installation crews serving Lake Worth, FL, Greenacres, FL, Palm Beach Gardens, FL, and West Palm Beach, FL from our Miami coordination office. Every service area follows the same Haven Standard: written price before work, verified crews, documented photo record, and the 365-Day Done Right Promise.
Serving Royal Palm Beach, FL - Our Local Coverage Area
We’re based in the Royal Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Royal Palm Beach
Most Royal Palm Beach subdivisions are deed-restricted and require architectural committee approval before exterior changes; we provide product data sheets, finish samples, and code-compliance documentation to support your application, and we schedule installation only after written HOA approval or the required waiting period has passed.
We pull the building permit as standard on every Royal Palm Beach job, submit product approval documentation and installation plans, schedule required inspections, and provide you the final approved permit card; permit fees are itemized in your written quote with no markup.
We schedule measured surveys typically within 3-5 business days; the survey itself takes 45-90 minutes depending on opening count, and you receive the written quote before we leave - not a callback, not a follow-up email, but the actual price document you can review and sign on the spot or consider at your pace. Call (561) 475-1246 to schedule.
Call (561) 475-1246 to schedule your free measured survey and written estimate for windows and doors in Royal Palm Beach. Every quote is itemized, every crew is verified, and every job leaves a documented photo record under the Haven Standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Royal Palm Beach Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.