Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ES Windows Impact Garage Doors: The North Palm Beach Owner’s Guide
We stock and install ES Windows-compatible impact garage doors in North Palm Beach, with typical installed pricing from $2,800 to $5,400 depending on door size, wind-load rating, and whether the opening needs reframing. Most ES Windows impact garage door replacements we quote in North Palm Beach are completed within one business day of approval, and we carry common track, roller, and torsion spring assemblies on our trucks. Homeowners usually discover a problem when the door hangs unevenly, reverses unexpectedly, or makes a loud bang during opening - that last one often means a torsion spring has snapped under the stored tension of a 200-pound impact-rated door.
Which ES Windows Models This Applies To
ES Windows manufactures impact garage doors under several series designations, and the part you need depends on which generation you own. The most common we encounter in North Palm Beach are the ES-5000 and ES-7000 series, both rated for HVHZ (High Velocity Hurricane Zone) compliance. The ES-5000 uses a 2-inch track system with nylon rollers; the ES-7000 upgraded to a 3-inch heavy-gauge steel track with sealed ball-bearing rollers after 2019. Check the label plate on the door’s interior edge, usually on the bottom section’s left stile - it lists the series, wind-load rating in PSF, and manufacturing date.
We are an independent service provider, not affiliated with ES Windows. For most ES Windows impact garage door repairs in North Palm Beach, we source OEM track and hardware directly from ES Windows distributors in Miami-Dade. Aftermarket equivalents exist for rollers and hinges, but we do not substitute on torsion springs - the calibration must match the door’s weight and wind-load certification exactly. A mismatched spring on an impact-rated door can overstress the opener, void the HVHZ compliance documentation, and fail inspection if you sell the home.
One compatibility gotcha we see regularly: ES Windows changed its bottom bracket geometry between 2017 and 2019. The pre-2019 bracket uses a 3.75-inch vertical dimension; post-2019 uses 4.25 inches. Measure yours before ordering, or we will measure it on the first visit and note it on the written scope you keep.
Signs Your ES Windows Impact Garage Doors Is Failing

- The door reverses before closing fully. This usually traces to misaligned safety sensors, but on ES Windows impact doors it can also indicate a weakened torsion spring that cannot overcome the door’s weight in the final closing phase. The opener’s force limit trips, and the door backs off.
- Loud bang or snap during operation. A torsion spring has failed. Impact garage doors are 30 to 50 percent heavier than standard doors due to reinforced steel and laminated glass; the spring was engineered for that load, and when it goes, it releases stored energy suddenly. This is dangerous - the spring can damage property or cause injury if someone is nearby.
- Door hangs crooked or one side rises faster. A broken lift cable or worn cable drum on one side. The ES-7000’s heavier sections make this more obvious than on lighter doors, and running the opener with this condition will twist the door panel and damage the track.
- Roller pops out of track repeatedly. Worn rollers or a bent track section. In North Palm Beach’s salt-air environment, we see track corrosion accelerate after five to six years, especially on garage doors facing the Intracoastal with no buffer wall.
- Visible gap at the bottom seal or light showing around the edges. Worn weatherstripping or settled bottom seal. For impact-rated doors, this matters beyond energy efficiency - the seal is part of the pressure-equalization system that prevents wind-driven water intrusion during a storm event.
Before
AfterReplacement Cost & What’s Included
For ES Windows impact garage door replacement in North Palm Beach, our installed pricing breaks down as follows:
| Component | Price Range (Installed) |
|---|---|
| Single torsion spring replacement (OEM-spec) | $340 - $480 |
| Dual spring system (full set) | $580 - $760 |
| Lift cables and drums (pair) | $280 - $380 |
| Roller replacement (full set, 10-12 rollers) | $320 - $440 |
| Track section repair or replacement | $380 - $620 |
| Full ES Windows impact door replacement (single car) | $2,800 - $4,200 |
| Full ES Windows impact door replacement (double car) | $3,800 - $5,400 |
What drives the range: door size, wind-load rating required for your North Palm Beach zone, whether the rough opening is plumb and square, and if the opener needs recalibration or replacement to handle the new door’s weight. Every quote we write includes parts, labor, haul-away, and the documented photo record. The 365-Day Done Right Promise covers the installation; OEM springs carry their own manufacturer’s warranty, which we register for you.
DIY or Call Us?

There is one safe check a homeowner can make: verify that the door is disconnected from the opener by pulling the red emergency release, then lift manually. If the door is heavy but moves smoothly, the springs are likely intact. If one side drops, a cable or spring has failed. Do not proceed further.
Torsion springs on impact garage doors store lethal tension. The ES-7000 series door for a double-car opening can weigh 350 pounds; the spring is wound to balance that load. Winding bars slip. Improper tools break. We have replaced doors where a homeowner’s DIY spring attempt bent the header and added $900 to the job. If the opening isn’t right, the window isn’t right - that’s where we start, and that applies to garage door geometry too.
For everything else - cable, roller, track, or full door replacement - the measurement, the part match, and the HVHZ documentation matter too much to guess. Call (561) 475-1246 to schedule your free estimate. We will measure, specify the exact part, and hand you the written price before any work starts.
FAQs
Most torsion springs are rated for 10,000 cycles, which translates to roughly seven to ten years for a typical residential door used twice daily. In North Palm Beach’s coastal environment, we see salt corrosion reduce that by 15 to 20 percent on doors within a quarter-mile of the water, particularly in neighborhoods east of U.S. 1 where the salt load is highest. Call (561) 475-1246 for an exact quote on replacement - estimates are free.
Yes, in most cases. Springs, cables, rollers, and track sections are individually replaceable on ES Windows doors. Full door replacement is only necessary when the panel sections are dented, the laminated glass is compromised, or the door no longer meets current Florida Building Code wind-load requirements for your specific North Palm Beach address. We will tell you which category you are in after measuring. Call (561) 475-1246 for an exact quote - estimates are free.
A standard spring or cable replacement takes two to three hours. A full door replacement, including removal, rough-opening verification, and new install, typically takes four to six hours. We do not promise same-day completion on full replacements because the measured survey and written scope must precede any work - Haven Clause 1. Call (561) 475-1246 to schedule your free estimate.
We carry common torsion springs, cables, rollers, and hardware for both the ES-5000 and ES-7000 series on our North Palm Beach trucks. Specialty wind-load springs or custom-size track may require a one-day order from Miami-Dade distributors. We will confirm part availability when you call and before we schedule. Call (561) 475-1246 to schedule your free estimate.
Written by Sonia Raman, Owner, Sightline Windows & Doors North Palm Beach at Sightline Windows & Doors North Palm Beach, serving North Palm Beach and nearby areas.










Before
After
Before
After
Before
After