3-Panel Sliding (3-Lite Roller) Windows in North Palm Beach, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

3-Panel Sliding (3-Lite Roller) Windows in North Palm Beach, FL

A 3-panel sliding window – also called a 3-lite roller – has three glazed sections in a single frame: the center panel is fixed, and the two outer panels slide horizontally past it on a track. That configuration gives you roughly twice the ventilation opening of a standard two-panel slider at the same rough-opening width, which matters in North Palm Beach where afternoon humidity and salt air make cross-ventilation a practical necessity, not a luxury. Sightline Windows & Doors North Palm Beach has installed and replaced these units through our Window Installation services across the town’s waterfront streets, the Anchorage Point neighborhood, and the barrier-island homes along U.S. 1 – every one with a written price before a tool was lifted and a documented photo record when the job was done.

If you’re researching 3-lite roller windows for a North Palm Beach home and want prices named in dollars before you commit to anything, call (561) 475-1246 – a live person answers, 24/7. Or keep reading; the numbers are on this page. Our broader Window Installation in North Palm Beach service covers every configuration we install, but this page focuses specifically on 3-panel sliders: what they cost, when they make sense, and exactly how Sightline handles the work from first measurement to final photograph.

When You Need 3-Panel Sliding (3-Lite Roller) Windows

• Wide openings with no room for a swing. Casements and single-hungs need clear interior space to operate. In North Palm Beach homes where a dining table sits under a wide bay opening, or where a breakfast counter butts up against the wall, a 3-lite roller keeps the full sightline unobstructed and never requires you to move furniture to crack the window.
• You’re replacing a failed two-panel slider and want better airflow. Many original sliders installed in North Palm Beach homes built in the 1980s and 1990s are single-pane units with corroded aluminum frames. Stepping up to a 3-panel configuration at the same rough opening increases the operable ventilation area significantly – often the difference between a room that breathes and one that doesn’t.
• Impact compliance is required by permit. Palm Beach County’s building code requires impact-rated glazing or an approved storm protection system for any replacement window in a residential structure. A 3-lite roller can be specified with impact-laminated glass – typically a 0.090-inch interlayer in a dual-pane unit – so you meet the county requirement without adding accordion shutters over an opening you want to actually see through.
• Your current sliders rattle, stick, or leak during rain. North Palm Beach sits directly on the Intracoastal; salt-laden air corrodes roller hardware faster here than five miles inland. If the panels drag on the track, won’t lock flush, or let water in at the sill during a northeast rain event, that’s a frame and hardware problem a track cleaning won’t fix permanently.
• You’re opening up a kitchen or great room wall and need a wide, low-profile unit. The 3-lite format is the right answer when a contractor is cutting a new rough opening wider than about 72 inches and a single window needs to fill it. The fixed center panel carries the structural glazing load while both operable ends give you independent ventilation control.
• You want to lower your cooling load with better glazing performance. A properly specified 3-panel slider – with a low-E coating targeting a Solar Heat Gain Coefficient (SHGC) below 0.27 – blocks meaningful radiant heat gain through south- and west-facing walls. In North Palm Beach’s climate zone, that spec matters eight months out of twelve.

Our 3-Panel Sliding (3-Lite Roller) Windows Process

1. Measured Survey – the document you keep. A uniformed, background-checked Sightline technician visits your North Palm Beach home and takes frame-to-frame measurements at every corner of the rough opening – width, height, and diagonal to confirm the opening is square. We record the existing sill slope, note any water intrusion staining on the rough framing, and photograph the site before anything is touched. This survey is the document you receive; under Haven Clause 1 (Have it in writing), the written quote cannot differ from what that survey shows.
2. Written Scope and Product Specification. Based on the measured survey, Sonia Raman’s team writes a scope that names the exact product – manufacturer, series, glass package, frame color, and hardware finish – alongside a line-item price. For 3-lite rollers in North Palm Beach, we typically specify impact-rated units from CWS or ES Windows depending on the size and performance tier you need. You receive this document before scheduling any installation date. There is no estimate that becomes an invoice later; they are the same document.
3. Permit Coordination. Replacement windows in North Palm Beach require a permit through Palm Beach County Building Division when the scope includes structural changes or when the unit type changes. Sightline handles permit submission, including the product approval (NOA) documentation for any impact-rated unit we install. We don’t hand that paperwork burden to you.
4. Old Window Removal and Frame Inspection. On installation day, the existing slider comes out cleanly. We cut the sealant bond, remove the frame, and inspect the rough opening and sill for rot, water damage, or out-of-plumb framing before the new unit goes anywhere near it. If we find deteriorated wood – common in North Palm Beach homes with older stucco exteriors that have allowed moisture to wick down to the sill plate – we document it in photographs and discuss repair options before proceeding.
5. Installation to Florida Building Code. The new 3-panel slider is set in the opening with the sill shimmed to a level, positive-drainage plane. We fasten through the fin or buck per the product’s approved installation instructions, apply a continuous bead of marine-grade sealant at the perimeter, and install the panel rollers and lock hardware per the manufacturer’s torque specifications. Every fastener count and sealant bead gets photographed as part of the documented photo record – Haven Clause 4 (Evidence on every job).
6. Final Inspection and 365-Day Done Right Promise. We operate both panels through their full travel, verify the locks engage flush, and confirm there’s no visible gap between the panel stiles when closed. You walk through the completed work with the technician, and you receive the documented photo record before we leave. The 365-Day Done Right Promise – written into the Haven Standard, not a verbal assurance – means that if anything about this installation isn’t right within the first year, we come back and make it right.

Before

After

3-Panel Sliding (3-Lite Roller) Windows Pricing in North Palm Beach

3-panel sliding windows in North Palm Beach typically run between $950 and $2,800 per unit installed, depending on size, glass specification, frame material, and whether impact-rated glazing is required. That range is wider than a two-panel slider’s range for a straightforward reason: a 3-lite roller at 96 inches wide with a PGT-grade impact laminate is a meaningfully different product than an 60-inch aluminum slider with standard dual-pane insulating glass. The numbers below reflect what Sightline actually quotes in this market.

What moves the number up or down inside those ranges:

• Glass specification. An impact-rated unit with a low-E coating targeting SHGC 0.22-0.27 costs more than a clear dual-pane unit. For west-facing openings in North Palm Beach, the better glass pays back in reduced cooling load over time; for a closet window on the north side, it may not pencil.
• Frame size and custom cuts. 3-lite rollers wider than 84 inches often require a custom factory order rather than a stocked size. ES Windows and CWS both offer custom runs, but lead time extends to four to six weeks and the unit price reflects that.
• Rough opening condition. A sill plate with active rot or a header that’s out of level adds carpentry time before the window can be set. We photograph and document any condition like this before touching it, and the scope gets updated in writing before the repair starts.
• Stucco repair. North Palm Beach homes with exterior stucco often require a color-match patch at the perimeter after removal of the old frame fin. We can include this in scope; it typically adds $80-$180 per opening depending on the patch area.
• Number of units. Multi-unit jobs across a whole house allow us to consolidate mobilization and permit costs, which brings the per-unit installed cost down. The written scope will show this line by line.

Every estimate Sightline provides is free, and if you have a written quote from another North Palm Beach installer, bring it to us. We’ll review it at no charge – our Free Second Opinion means you see exactly where the numbers differ and why, in writing, before you decide anything.

Call (561) 475-1246 to schedule a measured survey. The price you receive at the end of that survey is the price on your invoice. No adjustments, no surprises – Haven Clause 1.

FAQs – 3-Panel Sliding (3-Lite Roller) Windows

How much do 3-panel sliding windows cost in North Palm Beach?

In North Palm Beach, 3-panel sliding windows typically cost between $950 and $2,800 installed, depending on size, glass package, and whether impact-rated glazing is required by Palm Beach County code. The lower end of that range covers a standard dual-pane aluminum unit in the 60-72 inch width class; the upper end reflects a large custom-sized impact unit with a high-performance low-E glass package. Permit fees add $75-$180 per opening on top of the unit and labor cost. Call (561) 475-1246 for a written price specific to your opening size – the measured survey is free and the quote you receive from it is the number on your invoice.

Do 3-lite roller windows in North Palm Beach need to be impact-rated?

Any replacement window permitted in a residential structure in Palm Beach County must either be impact-rated or paired with an approved storm protection system like accordion shutters or storm panels. For a 3-panel sliding window – which typically covers a large, open wall area, unlike Awning & Hopper Windows – most North Palm Beach homeowners specify impact-rated glazing directly in the unit rather than adding a separate shutter system over it. Sightline installs 3-lite rollers from CWS and ES Windows with Florida Product Approval (NOA) documentation confirming they meet the county’s wind-load requirements. We handle permit submission and include the NOA in the permit package so you’re not tracking that paperwork yourself.

Can a 3-panel sliding window be installed in the same rough opening as my existing two-panel slider?

In most cases, yes. A 3-lite roller, like Casement Windows, is designed as a direct rough-opening replacement, meaning it goes into the same framed opening as your existing slider without structural modification to the wall. The framing, header, and sill remain in place; only the window unit itself changes. The main variables are whether the existing opening is square and level (we check both during the measured survey), and whether the new unit’s frame width matches the existing rough opening dimensions closely enough to avoid a custom cut. If the rough opening has settled out of square – common in North Palm Beach homes with older slab foundations – we document the condition and note any shimming or casing work needed in the written scope before installation begins.

How long does it take to install a 3-panel sliding window?

For a single 3-lite roller replacement in an existing opening with no carpentry complications, installation typically takes two to four hours per unit. Multi-window jobs – including projects with Bay & Bow Windows – are scheduled so the crew can move through the house systematically, which is more efficient than separate single-unit visits. Lead time from signed scope to installation day depends on whether your unit is a stocked size (usually one to two weeks) or a custom factory order (four to six weeks for most manufacturers we specify). Permit turnaround through Palm Beach County adds some calendar time; Sightline coordinates that directly and keeps you informed of the timeline in writing.

Key Takeaways

• 3-panel (3-lite roller) windows have one fixed center panel and two sliding outer panels – they deliver more ventilation than a standard two-panel slider at the same rough-opening width.
• Installed prices in North Palm Beach run $950-$2,800 per unit depending on size, glass specification, and impact-rating requirements.
• Palm Beach County requires impact-rated glazing or approved storm protection on all permitted replacement windows in residential structures.
• Sightline installs 3-lite rollers from manufacturers including CWS and ES Windows, specified by what the opening requires – not by what’s easiest to stock.
• Every job starts with a free measured survey; the quote from that survey is the invoice – no adjustments. That’s Haven Clause 1, and it has applied to all 18,000+ openings Sightline has installed since 2012.
• The 365-Day Done Right Promise is written into the Haven Standard and applies to every 3-panel slider installation we complete in North Palm Beach.
• Bring us any competitor’s written estimate – our Free Second Opinion costs you nothing and gives you a line-by-line comparison in writing.

Sightline Windows & Doors North Palm Beach is independently owned and operated under the Haven Standard. If you’re measuring a wide opening in your North Palm Beach home and want to know exactly what a 3-lite roller will cost – in writing, before any work starts – call (561) 475-1246. A live person will answer. You can also start by reading about the full range of options under our services, or go directly to our Window Installation in North Palm Beach page to see how 3-panel sliders fit alongside every other window configuration we install.

Written by Sonia Raman, Owner at Sightline Windows & Doors North Palm Beach, serving North Palm Beach.